• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Search results

  1. L

    Gas Left

    In mine, about 2 gallons.
  2. L

    Got caught in heavy rain with my CHAD

    So you're saying that the CHAD also protects from lightning strikes ;) What a windshield! :D
  3. L

    Headlight Problem

    The only way that the lights would stay on with the battery "unhooked" is if you "unhooked" the battery under the seat. I'm going to assume that he actually unhooked it just to see if the system would reset.
  4. L

    What is the Coolest thing you like about your Spyder?

    The throttle blipper with a perfect downshift from my SE5
  5. L

    My 600 Mile Service Results – Your opinion?

    Tom, per the gas smell. The vent on the canister is just under you and doesn't have a hose attached to it. Attach a hose to it and run it toward the back and lower part of the bike. I know that's not really a fix as the canister should be replaced but it will take care of the problem untill...
  6. L

    Headlight Problem

    The momentary headlight switch on the throttle side probably got wet and is shorting out. Needs replacing.
  7. L

    Heat-sink paste

    OK, tracked this stuff down. :lecturef_smilie: The heat sink paste is made by Wacker Chemie AG and is otherwise known as Wacker Silicone Heat Sink Paste P12 This same stuff is also specified for all Rotax aircraft engines. It's also commonly used by Electronics manufactuers as a heat sink...
  8. L

    Rotating the Front Tires

    Silly, the one in back.:D
  9. L

    Heat-sink paste

    Aren't most anti-sieze compounds high in metal content and are going to behave like a heat sink compound anyway?.......Is there any difference :dontknow: Just trying to avoid having to buy the BRP stuff.
  10. L

    risers and turns

  11. L

    Windsheild

    Is it better that the windshield shatter and those sharp edges slice into you or that it remains intact and pushes you over the top? I'm not sure that you even impact the windshield in an accident.:dontknow:
  12. L

    Rear pulley Group buy? Which manufacturer?

    might actually be easier to change 4th and 5th gears in the tranny
  13. L

    Rear pulley Group buy? Which manufacturer?

    While you're at it find a manufacturer for a new belt as well.....I'm pretty sure there isn't enough adjustment range once you have on the new pulley. :lecturef_smilie:
  14. L

    Pulls Left

    Even on a crowned road the Spyder pulls to the left. Not hard it just drifts that way. Short of taking it to the dealer is there anything obvious that I should look for? The tire pressures are good.
  15. L

    What Type Registration?

    __:hun: :shocked: Your sales person is apparently clueless. It's a motorcycle in Missouri.
  16. L

    jack or no jack for ride-on install

    When I was installing Ride-On it was a cold day. I found that putting the bottle in the microwave for about 10 to 15 seconds made the stuff much easier to get thru the tube. nojoke Oh, and I didn't jack.
  17. L

    My last mod....

    I found all the parts at Lowe's in the air compressor section except the filter, where'd you get that Lamonster?
  18. L

    Evoluzione air filter?

    quote Evoluzione "featuring the latest in synthetic dry media (meaning no more messy cleaners & oils), this high flow air filter produces the best clean air flow with the lowest restriction - this is possible by employing larger pleats than other standard filters. this filter is a direct drop-in...
  19. L

    Evoluzione air filter?

    Admittedly, if the oem doesn't fit well then it doesn't matter how well the element filters if the dirt goes around the edges. Mine doesn't seem to have that particular problem. If yours does then for sure the evoluzione filter will be an improvement. My take on the article was the lower the...
  20. L

    Evoluzione air filter?

    Well, after reading this article http://www.nicoclub.com/articles.php?id=180100 :yikes: I'm sticking with the oem filter. nojoke
View older results
Back
Top