• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

What did you do to your Spyder today?

I modified my old Sena SMH10 to fit my wife's brain bucket. Now we can talk via intercom (to my Sena 20S Evo) or she can shut me down and just listen to tunes via bluetooth from her phone.
 
The sway bar made a big difference cornering, well worth the money to me. I'm very happy with the results. Also very happy with the belt tensioner, i had some slight vibration that i just thought was normal or maybe from lugging the engine at times. The tensioner took all of that out. When i had my HD's i would add accessories and sometimes the end result was negligible, i am very happy with all the mods i've made to the Spyder so far.
 
Last edited:
Installed the RLS Cat Delete Pipe and the DynoJet Power Commander Fuel Controller. Can really tell the difference can hit 70 real fast!
 
Checked the vacuum lines on Spydey and all good. Dropped a torx bit into a black hole while undoing a screw that as it turns out didn't need removing - note to self, read the instructions again before working on it. Removed one of the H4 headlights only to find I had left the new globes in my car which my daughter has several hours away. Found a connector underneath one of the switches was not anchored correctly so fixed that. Discovered the dual usb outlet I bought misses out on fitting in the switch by a couple of mms (width). Oh well out with the dremel when I re-visit it at which time I will also upgrade the high beam. Overall a good experience though as I am getting more comfortable working on it.
 
Today I have assembled the armrests that I bought a few months ago. Since my wife still cannot came with me, I was not in a hurry.
Half an hour of work and that's it. When she test it I will adjust to her feelings.
 
I let my SPYDER sit in the garage today and will for 1 more week.... today it is 107 and
Sunday 110, Monday 106... and so on until this heat wave passes
 
Disassembled, cleaned and lubed all three brakes. Other than one a bit squeaky brake, all look like new..
 
Finally got my PPA wheels on. Like the look much more than the OEM wheels and are much easier to clean.

20200822_175002.jpg
 
Removed rear wheel and took it down to have a Hankook Kinergy ECO 2 215x60x15 fitted. Whole process was easier than I first thought. An extra set of hands definitely helped out too.

IMG20200825085416.jpg
 
Rode in the RAIN...in Northern Nevada.
Re-installed the old/original gas cap. The gas smell is gone.
 
You must log in or register to reply here.

Similar threads

Haze
What do you carry for Travel Snacks?
2 3
Replies
40
Views
4K
Little Blue
Little Blue
ARtraveler
Are You Ordering/Purchased A New 2025 Spyder/Ryker??
Replies
13
Views
702
AnatoleSea2Sky23
AnatoleSea2Sky23
SteveandBelinda
  • Locked
What Cleaner/Polish do you use on your Spyder?
Replies
1
Views
665
Peter Aawen
Peter Aawen
B
What Communication devices do you use between rider/pillion & other riders in your group?
2 3
Replies
45
Views
2K
jnt
jnt
Martin Slovakia
One of the Best Roads in The World you should visit one day!!!
Replies
4
Views
541
PURPLEON3
PURPLEON3
Back
Top