2019RT Front Sprocket questions/Concerns

[P.W.]

Okay, I getting a headache from reading threads about the front sprockets rusting and then stripping out.
Few questions that may save me from reading for two more hours.....
1- Were the sprocket splines lubed at the factory in 2019 RT's?
2-Are you to replace the bolt at the same time? or just re-Loctite the old bolt?
3-Torq spec for bolt? I thought I read 95# but I can't find the thread back.

Our bike is in the shop for other issues, but when I get it back I'm checking the front sprocket for rust.
I believe in being proactive. I MAY even order a new front sprocket and moly paste to have on hand for a spare.

Thanks for your time and help!!
P.W. :cheers:

 

[ulflyer]

https://www.spyderlovers.com/forums/showthread.php?135319-Rust-dust&highlight=front+sprocket

Lots of good info in the above thread. Worth reading all of it. Emphasis on using ASSEMBLY PASTE ON THE SPLINES, NEW BOLT, TORQ 110LB. Some have used Honda m77 assembly paste. I have not done mine yet, but ordered a small tube of the honda paste and intend to get a new bolt just to have on hand.

https://www.amazon.com/Honda-HN-087...rds=honda+moly+60+paste&qid=1616512312&sr=8-2

 

[P.W.]

Thanks for the info!

 

[P.W.]

Looking a round for a new pully to have on hand.....What is the correct part number? The numbers are all over the place.
I mean I look at three different sites and the part number is different on every site????

 

[PW2013STL]

The new front sprocket is 705503239. This is the white one that came out after September 2020.

 

[Haze]

I ordered a front pulley for my 2017 F3T from CheapCycleParts. Although I ordered the catalog p/n for the 2017 they sent me the new "White" pulley.
The new p/n: 705503239.