What did you do to your Spyder today?

[Lew L]

.

Lubed trunk, frunk, and bag latches after rerouting the ground wire for the driving light on my poor, old, slow V-Max. Added a tablespoon to the brake reservoir.

Lew L

 

[Ex-Rocket]

Finally got around to changing the oil & filter on my 2017 F3 Limited. Been using Amsoil in my bikes but this time I went with the K&N filter. Only a couple dollars more. Did the oil & filter change myself and saved a couple hundred dollars.. Now she's ready for the riding season.

 

[Deanna777]

I installed a IPS Belt Tensioner from Lamonster Garage and the Lamonster Mount 2.0 with Dual Power Plates.


I have a 2014 RTS-SE6 spyder.


Deanna

 

[Haze]

Worked on centering the handle bars and building targets for an alignment.

 

[bigbadbrucie]

Worked on centering the handle bars and building targets for an alignment.

In my mind, targets are meant to fire a gun at, be it a rifle or pistol.:roflblack::yes:

 

[KSCRZR]

Got new tires all the way around, oil change and new rear pads, actually done Friday at Lamonster. Also grabbed a gps mount so I can replace the stock 660 mount so I can use the Zumo XT I bought originally to just use on my Concours 14 but after the ride with the 660, I can't do that again. Actually got checked out by Lamont and got to talk a bit, had to laugh when the total came to $998 and change.

 

[troop]

Got my TricLED sequential lights installed over the weekend.

 

[Wahrsuul]

Installed Lamonster belt tensioner, magic mirrors and a new right side fog light. The tensioner sure smooths out the ride.

 

[Hoodrich13]

Just showing whats been done since 7/2021

2 f3 limited :
Lamonster belt tensioner and magic mirrors
Modified lamonster/quadlock phone mount
Tricled foglights and cyclops light
Lamonster foam grips
BajaRons swaybar
Led design headlight bulbs
Full underglow kits
BRP frunk and saddlebag luggage
Baldwin Ironworks cat delete
Green one (mine) has Akrapovic Sinister exhaust

-


Oh yeah. Custom paint by HRC in Greensboro NC

 

[rv6a]

Installed ST2 Systems - ST2 Brake Module & USB Car Charger - In 3rd blank switch spot on RTL

 

[Lew L]

.

Ordered a Lamonster belt dampener to replace an older Doc Humphreys dampener.
Lew L

 

[Haze]

Finished my DIY alignment project.
Handlebars are now level and the bike corners better than ever.
Not perfect but a vast improvement until I can get it Squared Away.

 

[Deanna777]

Installed Lamonster belt tensioner, magic mirrors and a new right side fog light. The tensioner sure smooths out the ride.

You will like the magic mirrors, I have the magic mirrors on my 2014 RTS-SE6.

Deanna

 

[RickWB]

Installed my set of Tricled sequential turn signals. Certainly took more time than Brandon on Slingmods!

 

[vito1943]

Went for a short ride. Still chilly here, but at least it was not raining so I took advantage of the day and went for a short 30 miles ride.

 

[Yabbadabbadoo]

Installed my new Pedal Commander. Went for a little lunch time ride. It seriously wakes up the ryde. It will take me some time to decide which modes I prefer. Also just ordered the license plate frame with LED stop/brake/turn lights from Lamonster.

 

[KSCRZR]

Got my BajaRon bar and Lamonster links installed. Surprised how little, as in zero, movement the stock plastic links had. Then I started looking at what it will take to wire up my ZumoXT but I tapped out for the night. Hoped my magic mirrors would of been in today to have everything done this weekend but they shouldn't be as much work to do.

 

[Lew L]

Ordered a Lamonster belt dampener to replace an older Doc Humphreys dampener.
Lew L

Now installed - EASY.

Doc's original with about 15k miles was in good shape. It had 2 bearings that have no play and spin easily/quietly. The spring still has tension and the zerk fitting on the pivot was clear but I disassembled the pivot and it now moves like new.

Lew L

 

[BCNewell]

Installed a Lamonster Top Cuff bundle with USB port, Ram QuickGrip phone mount, and adjustable bottle holder. Tapped into wires under left side panel. Also installed a pair of foam grips. Both were easy-peasy, following Lamonster’s videos.

 

[Haze]

Painted and reinstalled my brake pedal boot guard.
Built a cane holder that integrates into my LaMonster rear rack.
Took SWMBO out for Birthday dinner.