-
There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.
What did you do to your Spyder today?
- Thread starter Mazo EMS2
- Start date
BigPoppa
Member
What are you using to clean the matte finish? I ended up ordering a couple of different matte paint cleaners from Amazon. I’ve only tried one of them so far and while it definitely removed the little bit of dirt on the panels, it didn’t seem to do anything more. Maybe that’s by design. I may be used to using Plexus on my previous bikes’ plastic bodywork which gave them a nice shine in addition to cleaning up grime and bugs.
Deanna777
Well-known member
I am using this :https://www.chemicalguys.com/meticu...-e8ROP_F4Vtl5F9exM_RLtvpkf4dABORoCVuMQAvD_BwE
What matte cleaners did you order from Amazon?
Also i use from Chemical Guys a Jet Seal Matte Sealant and paint protectant. It is a protective sealant formulated to help preserve the original crisp satin sheen on matte surfaces without adding unwanted shine or gloss. You can get the above as a kit. It also comes with Matte detailer spray + sealant. Go to Chemical Guys.com and take a look.
Deanna
BigPoppa
Member
Thanks. I’ll order a jug of that. I ordered these from Amazon:
Matte Paint Car Detail Spray - No Gloss Wipe Down Car Cleaner - 22 oz https://a.co/d/j7kA9j0
Flitz FM 11506 Flat Matte Finish Cleaner, 16 oz. Spray Bottle , Black https://a.co/d/2NSGTx0
I’ve only used the Flitz so far.
Matte Paint Car Detail Spray - No Gloss Wipe Down Car Cleaner - 22 oz https://a.co/d/j7kA9j0
Flitz FM 11506 Flat Matte Finish Cleaner, 16 oz. Spray Bottle , Black https://a.co/d/2NSGTx0
I’ve only used the Flitz so far.
Deanna777
Well-known member
You can find the Chemical Guys Meticulous Matte Auto wash for Crisp Satin and Matte Finish and the Jet Seal Matte Sealant & Paint @ Walmart.
Also I use a micro fiber to wash my bike.
Deanna
Dasmoetorhead
Active member
Dasmoetorhead
Active member
I attempted to install the anti-theft bolt & nut on the BRP Backrest. Didn't work out for me. With the hard rear seat cowl installed, there's no way to do it I guess. To install the back rest the backrest support bar must 1st slipped through the rubber grommet on the cowl, then the bar is slipped into the bracket. With the stock pillion seat installed you can do it. I don't ride double, so I like the seat cowl, due to its convenient lockable storage.
Last edited:
Dasmoetorhead
Active member
Packed a lunch and road TN hwy 421 the "snake". Checked out all the bikes at the Shady Valley country store. Lots to see there, and it's a nice rest stop. If your into motorcycles it's a must do. I'm blessed in that the snake is in my backyard.
Dasmoetorhead
Active member
How do you like the RLS pipe, or is it too soon to tell?
Mine’s a tad quieter w/ the secondary baffle installed than my wife’s w/o the secondary baffle. But I wear a full-faced helmet w/ earplugs , so I don’t notice any sound change at highway speeds. I do, however, notice that there’s a little less heat radiating up from below in my “bubble” behind the Route 129. (I got the black ceramic-coated; my wife has had the polished stainless for almost a year.). And the pipe’s a LOT lighter than the factory primary muffler. A little more growl when starting and idling ... another reason for folks to check out the cool 3-wheelers!!
Dasmoetorhead
Active member
NorwegianRT
Active member
Oil and filter change and drivebelt off !
Thought I'd take the two hr drive to my CanAm dealer and get oil and filters for my Spyder RTS 2012.
Called a friend and he came with on his BMW GS 1250. Weather was great and after getting oil and filter and booking shop time for valve adjusting, we decided to go more inland on the way home.
We drove rather hard and fast on the twisting roads and I suddenly felt there was something wrong with the Spyder, so I stopped and did a walk around and crawl around and there it was!
Some teeth missing on the belt and nothing else to do than drive home carefully. And of course, the shop had closed for the day, so now I will have to call about a new belt tomorrow.
Safely home the Spyder was put on the lift, and I did the oil and filter change. I also took the belt off before I decided to go inside and find my comfy chair for the rest of the day.
I hope they have a new belt in stock, so I don't have to wait for a new one too long.
ray:
Thought I'd take the two hr drive to my CanAm dealer and get oil and filters for my Spyder RTS 2012.
Called a friend and he came with on his BMW GS 1250. Weather was great and after getting oil and filter and booking shop time for valve adjusting, we decided to go more inland on the way home.
We drove rather hard and fast on the twisting roads and I suddenly felt there was something wrong with the Spyder, so I stopped and did a walk around and crawl around and there it was!
Some teeth missing on the belt and nothing else to do than drive home carefully. And of course, the shop had closed for the day, so now I will have to call about a new belt tomorrow.
Safely home the Spyder was put on the lift, and I did the oil and filter change. I also took the belt off before I decided to go inside and find my comfy chair for the rest of the day.
I hope they have a new belt in stock, so I don't have to wait for a new one too long.
ray:Attachments
Last edited by a moderator:
NorwegianRT
Active member
I have never regretted spending money for the Big Blue, it is great and makes things a lot easier for me and my knees. You will love yours as well I am sure :thumbup:
Last edited by a moderator:
RiderDuke
Member
Bajaron swaybar installed last Thursday. Oh and who better to install then Bajaron shop. Lol. Yes that's my bike on the lift. It was only a 6hr ride, just a small detour on the way to Bairsville Ga.
Also had them put a Altimax rear tire.
Rode the weekend in the GA, NC and TN mountains.. Swaybar was an awesome addition.
Also had them put a Altimax rear tire.
Rode the weekend in the GA, NC and TN mountains.. Swaybar was an awesome addition.
Dasmoetorhead
Active member
I still want one, but the Big Blue Rep told me they do t have one yet that fits my 22 F3S :-( I bought the Harbor freight blue aluminum lift, but I really don't like it. I figured the undercarriage on a F3 are all the same, but I guess not.
Similar threads
