mirror retainer tabs broken

[spyderfriendly]

2010 RTS
I broke the mirror tabs while removing them and cant seem to locate the items for replacement. Anyone have a part number? Thanks

 

[stevedfive]

219800156 for the lower two $15
219800158 for the upper one $8

 

[PMK]

Order spares...Keep them in the frunk just in case, cheap insurance to save a cool ride or event.

PK

 

[Bob Denman]

:agree: They bust easy enough, that having some spares available is a GOOD idea! :thumbup:

 

[2ndChildhood]

I did the same thing. I found them on the following web site for my 2012 RTL

http://parts.spyder.brp.com/Index.a...1i6f9sjn0&catalog_id=0&language_id=1&siteid=1

There were under body and accessories console item 60b and 60d.


ToM
SpyderFest '15

Sent from my iPad using Tapatalk HD

 

[oldguyinTX]

:agree: They bust easy enough, that having some spares available is a GOOD idea! :thumbup:

:agree: I carry spares with me at all times, both upper & lower. Last season I hit a pothole with the rear tire and BOTH mirrors popped off. Sure enough, the upper El Cheapo plastic retainers were broken. Fortunately, I had the foresight to zip tie together the electrical connectors for the turn signals, so I didn't lose the mirrors. Found a safe place to pull off, installed two new retainers, and was back on the road in 15 minutes. Of course, I ordered replacements for the ones I used for the repair. A sorry retention system, and the parts are not cheap. I have them shipped to my dealer (about 20 miles away) to avoid the unbelievably high BRP shipping cost.

 

[Rd_Runner]

Me too!

Pretty much same thing happened to me. Yesterday I hit a deep chuck hole (seems Colorado Springs has 100s of them this year) at low speed.
Left side mirror popped off. I tried to put it back on and the upper plastic retainer disintegrated. So I went to my local dealer to get a new one.
Of course Murphy's law ensured they had the retainer for the right side but not the left.

So...I went home removed the right side mirror and used the retainer (reversed) to trace a template out on a body washer.
Drilled the holes and trimmed a 1/8" rubber washer to fit under my new metal retainer. It is not the prettiest but if fits and the mirror is tight.

I will eventually order a new OEM retainer...maybe.

 

[M T Pockets]

Looked to me like the part# 219800156 & 158 are the same for both sides. Did you break something else? I just ordered a set just in case.