keys, locks, and the ignition switch...

[sduskin]

Well, the ignition switch on my 2014 RT-S SM6 failed. The dealer replaced the ignition switch and both of the cables to the frunk and the seat. 2 new keys so they re-programmed the DESS, etc. So all is good with stuff in front of the driver.

HOWEVER, they didnt replace the rear center cargo lock. For that, I still have to use the old key.

Now, my question is, how do I get the rear lock to use the new key? I really dont want to have to remember 2 keys or carry 2 keys for my spyder.

Thank you in advance for your help and advice.

 

[GOZFST]

Can you get the tumbler out? If so on my GIVI bags when I wanted them all keyed the same I took the tumbler out, put the key I wanted to use in and took a dremel tool and ground all of the pins that were sticking up off flush with the barrel, that always worked for them.

 

[Chupaca]

Here's what I would do...

I would pop the lock out and take it to a locksmith and have it re-keyed. If you can't get it out yourself run the spyder by a locksmith and have them do it. Unless you have locksmithing skills I would not pull it apart and grind pins down...jmo dont ask since then I became a locksmith.....:thumbup:

 

[trikermutha]

well I would take it back and have them fix the rear lock since the rest was replaced by BRP warranty

Makes no sense having 2 keys to unlock your bike

 

[Bob Denman]

:agree: Let this one fall back in the dealer's lap... :thumbup:

 

[BLUEKNIGHT911]

THE IGNITION SWITCH - ISSUE

This is why I have separate mechanical PULL cables for the Frunk and Seat and if you have a GAS DOOR both can be accessed after you un-lock the door so they are secure ....... Mike :thumbup:

 

[Bfromla]

well I would take it back and have them fix the rear lock since the rest was replaced by BRP warranty

Makes no sense having 2 keys to unlock your bike

:agree:100%:2thumbs::clap: The dealer should have done that without question :lecturef_smilie: :gaah:Now they are costing you valuable riding time & gas:banghead: Find a way to brake even or something for their blunder, good luck. The cores can be re keyed if you can get them out, highly suggest a locksmith however to get it right.