• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Installation of car tire.

S

Spyderman41333

New member
Ok people. Today I called our local Spyder Dealer in Kelowna, BC and asked about installation of a car tire on RT. I advised the service dept member that I had the EXACT size rear tire, except it was a Toyo car tire. I asked if they could install it, as I have heard that some dealers would not install a a car tire. The answer I received thought, has boggled my mind, as they said the reason they would not do it, is that it was a "Speed Sensor Issue" I am totally confused as how the exact same dimensions would cause a speed sensor problem. I think they are blowing smoke, but has anyone else heard of this. I guess I will just save myself money and do it myself.

Confused in Canada
 
Spyderman41333 said:
Ok people. Today I called our local Spyder Dealer in Kelowna, BC and asked about installation of a car tire on RT. I advised the service dept member that I had the EXACT size rear tire, except it was a Toyo car tire. I asked if they could install it, as I have heard that some dealers would not install a a car tire. The answer I received thought, has boggled my mind, as they said the reason they would not do it, is that it was a "Speed Sensor Issue" I am totally confused as how the exact same dimensions would cause a speed sensor problem. I think they are blowing smoke, but has anyone else heard of this. I guess I will just save myself money and do it myself.

Confused in Canada
Click to expand...

If it looks like smoke and acts like smoke it's most likely smoke
 
It must be us, the Spyder riding community. Apparently the dealerships think we're all stupid. I know you're in a different country, therefore have different laws, but I would forego any service at this dealership. Once a dealership tried to blow smoke up my rear I tend not to forgive them. I mounted my own and it wasn't too hard. For about the price I was going to have to pay to have my car tire mounted I came away with a manual tire mounting machine and a balance shaft.
 
Smoke, smoke, smoke. No speed sensor problem, not a law problem in Canada, not a law problem in B.C. I think yhe chap you were talking to may have been “smoking”...... The dealer here will do it, no problem. Good dealer and knowledgeable!
 
bs-meter1.gif

It is a shame that they don't either say they just don't want to do it. Or that they have no idea what they are talking about. Owners have put larger than stock tires on their Spyder with zero issues. So the same size tire is certainly not going to give any problems.

Sad...
 
Last edited:
The other day, I stopped at my favorite non ethanol gas / full service / tire station to fill up and noticed the mechanics twiddling their thumbs from lack of customers. Having noticed some vibration from the not so wonderful Kendas, I asked if they'd do a wheel balance on the fronts. Not only did they do it, they didn't charge me. I have had them put tires on our car and also premium struts and shocks, and regularly get oil changes there, so they know I'm a regular.
Since they were good about the wheel balance, I asked if they'd mount tires and they said they would. Then I asked if they would match Tire Rack's price and they said they would beat it. Guess where I'm getting tires for the Spyder.
I bring this up because I'm sure there are other tire shops that would be just as cooperative. It never hurts to ask. Eh?
 
Agreed....lots of smoke being blown where it often remains dark!! I wouldn't go back there for a ball cap. The dealer is yankin your chain because they don't make the money on a carry-in tire. Usually they'll they'll play the "liability card", which is a little more believable, but I don't buy that crap either. If you have the tools and confidence in yourself, pull the wheel and take it to your local garage and ask them to mount the tire for you. There are some very good videos on pulling the rear wheel on youtube. Your dealer should have been up front with you and at least fed you one of the more common lines of BS.......:banghead:
 
Thanks to everyone for the quick and awesome replies. Glad we are all in agreement. And yes, baring any major mechanical issues beyond my abilities, I will not be dealing with Banner Recreation in Kelowna. I have changed the rear tire on my 2008 GS, but the procedure seemed a little more complex on the 2013 RT, but I will now take up the challenge. Appreciate the knowledge of everyone in this group. Cheers from Canada and stay safe.
 
There are YouTube vids on rear tire removal. Two important things; Have the parking brake off. Do not touch the alignment adjusting screws. Take note what spacers went where. Set the spacers in something that holds them in order. It will help to take photos to aid in re-assembly. Torque the axle to the correct number. After all is done, spin the wheel to check the belt alignment before lowering the bike. If it's off, there are good videos for that too.
 
RICZ said:
There are YouTube vids on rear tire removal. Two important things; Have the parking brake off. Do not touch the alignment adjusting screws. Take note what spacers went where. Set the spacers in something that holds them in order. It will help to take photos to aid in re-assembly. Torque the axle to the correct number. After all is done, spin the wheel to check the belt alignment before lowering the bike. If it's off, there are good videos for that too.
Click to expand...

That’s the best list of crucial steps I have seen, Ricz :2thumbs:.......very easy to hunt up videos for more in depth detail if required :thumbup:

Pete
 
RICZ said:
There are YouTube vids on rear tire removal. Two important things; Have the parking brake off. Do not touch the alignment adjusting screws. Take note what spacers went where. Set the spacers in something that holds them in order. It will help to take photos to aid in re-assembly. Torque the axle to the correct number. After all is done, spin the wheel to check the belt alignment before lowering the bike. If it's off, there are good videos for that too.
Click to expand...

:agree: and let me add - in order to keep the EXACT same setting for the rear tire alignment AND tension .... just remove the rear SHOCK bolt everything will remain as it was when you re-install the wheel / tire ...... ANNNNNNNNNNNNND if your RT has the auto compressor on it, you MUST dis-connect the arm on the left side of the swing arm ....... Mike :ohyea:
 
Just wanted to let everyone know, I love Tire threads=:-) and from memory, I have changed the tires on all of the motorcycles I've owned ridden starting with the first motor bike I bought in 1975. That 1st bike was a 1971 Yamaha 360cc 2 stroke. Was either the DT or RT, can't remember but I do remember using a pair of screw drivers for tire irons and yes, I punctured the new tube I was installing to repair the flat tire/tube I was replacing. Some of us have to do it wrong in order to learn how to do it right

Anyways, 45 years later I'm still doing my own tire work, by hand. I made a concession to using bead breakers some years ago but I've broken the tire beads by the heels of my boots more that way through the years. Looking at the wheels on my Ryker I know it's only a natter of time until someone steps up and offers a way so I can balance all three of them in my home garage

But getting back to the OP's original intent, having a Can Am dealer install the car tire you brought to him, I think what some *may* be missing is, the Can Am dealers for the most part (not always) want you to buy the tire you want installed, from them. It's akin to you walking into a restaurant with a couple of eggs and asking them to cook the eggs you brung. The restaurant/diner will feed you but they will supply the eggs. Just a thought

BTW, I've been behind the grill and the only time I remember ever preparing food that was brought to the kitchen other than through normal supply lines was when I was the line chef at the Baltimore Oyster House on Big Pine Key and one of the waitresses brought in some Spyder crabs she grabbed from underneath her dock. BTW2, that was some of the best crabmeat I ever had=:-)
 
shakin_jake said:
But getting back to the OP's original intent, having a Can Am dealer install the car tire you brought to him, I think what some *may* be missing is, the Can Am dealers for the most part (not always) want you to buy the tire you want installed, from them. It's akin to you walking into a restaurant with a couple of eggs and asking them to cook the eggs you brung. The restaurant/diner will feed you but they will supply the eggs. Just a thought
)
Click to expand...

While your analogy above is absolutely correct, Shakin Jake, and I agree with it completely, that is not the main issue with CanAm dealers and aftermarket tyres. I have two dealers near me, and both have not been willing to buy a non Can Am recommended tyre to install for me, and I have a pretty good relationship with them:thumbup: The issue is far more deep seated, with many theories posted, but it certainly appears to be along the lines of - “If you (insert dealer here) put on a non recommended Can Am tyre, we will revoke your dealer license....and/or you may be found liable if the CanAm is involved in an accident - signed CanAm”. Some dealers simply ignore this and install aftermarket, but most toe the CanAm company line. :coffee:

Pete
 
I had my dealer install a rear tire (Kumho) for me and balance it $129.00 0.9hrs labor. They asked me how much I paid for the tire and where I bought it. They wanted to offer it to their customers because the Kenda costs so damn much, I don't remember how much they said they charged for it but I was FLABBERGASTED. Next time I'll remove it my self and take it my local tire shop, they didn't charge me anything when I had them change and balance the fronts, I buy all my vehicle tires from them.
 
Just this week I took a new car tire (Kumho Esta) and wheel into local dealer in Red Deer Alberta to have them mount and balance. They had no problems doing this and even suggested OEM was a POS. I haven't had a chance to try it yet as mother nature has been a bitch.
 
. I guess I will just save myself money and do it myself.

yes:thumbup::thumbup::thumbup:

i go one step farther...i bought a Momar bar and fabricated a jig off the back of my ute.....now i do all my own rears...i also use "habour freight" balancer but not really necc imho

its just not that difficult;)
LQhT3ob.jpg


bbXXAxW.jpg
 
You must log in or register to reply here.

Similar threads

Bangorbob
Warranty Question - Would you let a regular M/cycle shop fit a rear tire?
2
Replies
25
Views
2K
Bangorbob
Bangorbob
V
Bummed out waiting for a part
2
Replies
31
Views
3K
old Timer
O
GRHorst
Damaged a Rim on my F3L when we hit about a 4" rock that slid off of a rock wall by the road - afraid to ask what a new rim will cost!?!
Replies
19
Views
998
GRHorst
GRHorst
Peter Aawen
  • Locked
Can't reach your Rear Tire Valve Stem?? DO NOT DO THIS!!
2
Replies
24
Views
2K
Peter Aawen
Peter Aawen
E
Any ideas on what might cause this abrupt loss of power?
Replies
10
Views
796
Mikey
Mikey
Back
Top