bluestratos
New member
Well, since after 4 years BRP has not improved the stock indicator I added my own. I used to have a red arrow on the mirror but it did take up precious space so I installed two green hi intensity LED's. The mirror did not need to be opened up and I routed the led wires into the existing wiring sheath by cutting a small slit near the mirror end then pulling the wires out by the connector. I opened the connector up, soldered the LED wires to the existing pins and reassembled the connector. Voila! Plenty bright and a car can see these just as well as it pulls along side. The lights are so bright that I had to use a flash to kill the intensity but the bulb holder I used actually shields my eyes from the direct view so it does not blind me at night.