Who added risers made by Custom Dynamics or ESI to their RT

[mcalva]

Hi. Good morning from the other side of the Atlantic.

I'm looking for some risers for my rt 2011 ltd to maintain my correct position on and Approach the handlebar a few inches towards to me.

I've read something about "old bones" but I can't find more information.

Do you remember something about that?

As allways, thanks in advance for your help.

 

[BLUEKNIGHT911]

OLD BONES ??????

:roflblack:.....He means " Dog Bone ", as in dog bone style risers. A member here put some on an RT ( maybe an ST ) and posted pics and info on how it was done ,maybe someone remembers ????? ....... M :thumbup:

 

[mcalva]

With my back bones pain my mind had a little lapsus! pps:pps:
Thanks for your help.
Then bad not old bones. Or maybe both in my case? :roflblack:

Too much earlier in the morning. At the end I understood "dog".
Not bad neither old.

I've to check my medication. :roflblack:

 

[Warlock]

With my back bones pain my mind had a little lapsus! pps:pps:
Thanks for your help.
Then bad not old bones. Or maybe both in my case? :roflblack:

Too much earlier in the morning. At the end I understood "dog".
Not bad neither old.

I've to check my medication. :roflblack:

I put some dog bone risers on both of our spyders. Ours are GS and RS models. They were the 4 inch ones. Mine being a standard I had to modify it for the clutch reservoir.
David

 

[dlby]

Wish there were risers for rt but I think the only option is the fancy adjustable $400 new handlebars
Any other suggestions?

I love R&R put another dime in the jukebox baby!

 

[Bob Denman]

:agree: None for RTs: the Tri-Axial Bars are the only choice, if you want to custom-tailor the bars to your needs.

But you already knew this...

 

[BLUEKNIGHT911]

WELLLLLLLLLLLLLLLLLLLLLLLLLLLL

:agree: None for RTs: the Tri-Axial Bars are the only choice, if you want to custom-tailor the bars to your needs.

But you already knew this...

:lecturef_smilie:WRONG BOB, I said I saw the pics !!!!!!!!:gaah:.....Go to the DIY board pg 3....1/2 way down this thread Fitting Custom Dynamics " Ezy Risers " etc.........the thread has a Link with a complete how-to with pics etc. .....also another member " spyderfish " also did this and posted a pic too ...... good luck .......Mike :thumbup:

 

[Marker]

:lecturef_smilie:WRONG BOB, I said I saw the pics !!!!!!!!:gaah:.....Go to the DIY board pg 3....1/2 way down this thread Fitting Custom Dynamics " Ezy Risers " etc.........the thread has a Link with a complete how-to with pics etc. .....also another member " spyderfish " also did this and posted a pic too ...... good luck .......Mike :thumbup:

Hey Mike
The only thread that I can find Spyderfish posting about installing Custom Dynamics handlebar risers is on his 2013 STS. No mention of Rt Handlebar riser install.
Not trying to stir the pot ,I am curious because I have never seen handlebar risers installed on an RT before.Now I have seen Rt handlebars installed on an ST before.

 

[BLUEKNIGHT911]

HOWEVER

Hey Mike
The only thread that I can find Spyderfish posting about installing Custom Dynamics handlebar risers is on his 2013 STS. No mention of Rt Handlebar riser install.
Not trying to stir the pot ,I am curious because I have never seen handlebar risers installed on an RT before.Now I have seen Rt handlebars installed on an ST before.

If you had dug into ALL the info I posted you would have solved this riddle ..... But it requires digging - since you are not doing this - why bother ?????........ The OP is, so I think my info gives Him a better start than what other posters have told Him. ........ I checked some video's and the handle-bar ends looked the same to me, and there is info about cutting the old style also .......M :thumbup:

 

[Bob Denman]

Mike

http://www.lindsayroland.com/pdf/AddingRisers_toSpyderST.pdf
This is for adding their risers to an ST; not an RT...

 

[Marker]

If you had dug into ALL the info I posted you would have solved this riddle ..... But it requires digging - since you are not doing this - why bother ?????........ The OP is, so I think my info gives Him a better start than what other posters have told Him. ........ I checked some video's and the handle-bar ends looked the same to me, and there is info about cutting the old style also .......M :thumbup:

When did you post it .I searched Spyderfish posts. I did not know where to dig so help me out because I am bothering to find out

 

[Bob Denman]

Spyderfish's modifications were also done to an ST...

http://www.spyderlovers.com/forums/showthread.php?97489-2013-ST-changing-the-handelbar-level

I don't know if it can be adapted to an RT; but I kind of doubt it.

Mike,
If you can prove me wrong: :bowdown:

 

[BLUEKNIGHT911]

risers for rt

When did you post it .I searched Spyderfish posts. I did not know where to dig so help me out because I am bothering to find out

​On my post on this subject .....my second sentence " Go to the DIY board Pg.3 "etc etc

 

[dlby]

Welp
1st you cut the neck of the bike with a Sawzall.
Then change the rake by adding unobtainium to the gap caused by cutting.

Oh by the way you have to remove the entire front end off and install a 1969 Honda Dream 305 triple tree before beginning this project.
There may be a fee to dispose of this at your local waste place.
Then if you get this far you no longer require my assistance.

Cool Hand Luke!
Wat we have heeah iz a failyuh to communicate!

I love R&R put another dime in the jukebox baby!

 

[dlby]

Please forgive me
Its late and I had Irish Cream for dessert

I love R&R put another dime in the jukebox baby!

 

[Marker]

​On my post on this subject .....my second sentence " Go to the DIY board Pg.3 "etc etc

Found the post on the DIY board
Here is the link

http://www.spyderlovers.com/forums/...om-Dynamics-quot-Ezy-Risers-quot-to-a-2013-ST

 

[BLUEKNIGHT911]

DIY board

Found the post on the DIY board
Here is the link

http://www.spyderlovers.com/forums/...om-Dynamics-quot-Ezy-Risers-quot-to-a-2013-ST

:clap::clap::clap::clap:........... Does it all make sense now ......... I did a follow up post about Risers that are actually available to buy now.......M :thumbup:

 

[Marker]

:clap::clap::clap::clap:........... Does it all make sense now ......... I did a follow up post about Risers that are actually available to buy now.......M :thumbup:

yep makes sense now:thumbup: