spydercoach
New member
i have 2012 RT SE and am replacing the gauges (temp and gas). I m putting a volt gauge where the the old gas gauge was and wondering about the wiring.
There is a red and a black and a blue on a plug and a lone red wire i presume went to the light in the gauge. I want to put in a Performance volt gauge from Prosport and use the white in the day and amber at night. wire instructions are as follows: Red =12v accessory power ( i assume to go to the red wire from the original plug) BLACK =Ground negative (to black wire from plug) WHITE =Engine accessory power (NOW NOT SURE) ORANGE = Parking light. meaning a power source that has 12v power when parking lights are turned on.( NOT REAL SURE WHERE THIS ONE SHOULD GO ETHER). It says to use the white for the daytime and the amber mode for the night i am to wire the WHITE to acc power and the amber to parking lamp. WTF im lost. can anyone help please
There is a red and a black and a blue on a plug and a lone red wire i presume went to the light in the gauge. I want to put in a Performance volt gauge from Prosport and use the white in the day and amber at night. wire instructions are as follows: Red =12v accessory power ( i assume to go to the red wire from the original plug) BLACK =Ground negative (to black wire from plug) WHITE =Engine accessory power (NOW NOT SURE) ORANGE = Parking light. meaning a power source that has 12v power when parking lights are turned on.( NOT REAL SURE WHERE THIS ONE SHOULD GO ETHER). It says to use the white for the daytime and the amber mode for the night i am to wire the WHITE to acc power and the amber to parking lamp. WTF im lost. can anyone help please
Last edited: