• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

WIRING A VOLT GAUGE

spydercoach

New member
i have 2012 RT SE and am replacing the gauges (temp and gas). I m putting a volt gauge where the the old gas gauge was and wondering about the wiring.
There is a red and a black and a blue on a plug and a lone red wire i presume went to the light in the gauge. I want to put in a Performance volt gauge from Prosport and use the white in the day and amber at night. wire instructions are as follows: Red =12v accessory power ( i assume to go to the red wire from the original plug) BLACK =Ground negative (to black wire from plug) WHITE =Engine accessory power (NOW NOT SURE) ORANGE = Parking light. meaning a power source that has 12v power when parking lights are turned on.( NOT REAL SURE WHERE THIS ONE SHOULD GO ETHER). It says to use the white for the daytime and the amber mode for the night i am to wire the WHITE to acc power and the amber to parking lamp. WTF im lost. can anyone help please
 
Last edited:
i have prosport gauges installed and you have to choose what color you want to display when you wire them in how are you going to get the colors to change? my chioces were red/blue so i went with red but would love to have blue also.
 
i have 2012 RT SE and am replacing the gauges (temp and gas). I m putting a volt gauge where the the old gas gauge was and wondering about the wiring.
There is a red and a black and a blue on a plug and a lone red wire i presume went to the light in the gauge. I want to put in a Performance volt gauge from Prosport and use the white in the day and amber at night. wire instructions are as follows: Red =12v accessory power ( i assume to go to the red wire from the original plug) BLACK =Ground negative (to black wire from plug) WHITE =Engine accessory power (NOW NOT SURE) ORANGE = Parking light. meaning a power source that has 12v power when parking lights are turned on.( NOT REAL SURE WHERE THIS ONE SHOULD GO ETHER). It says to use the white for the daytime and the amber mode for the night i am to wire the WHITE to acc power and the amber to parking lamp. WTF im lost. can anyone help please


That's a nice looking gauge and I think I will order one too! From what I have read the 52mm one fits nicely in the Spyder, is that correct?
 
Back
Top