What year RT stabilizer bar fits the F3???

[MikeP]

There's been talk of some doing this to their F3's Appreciate the info...

 

[cheska]

Bam posted that a RT sway bar with the 4 RT bushings works but he did not specify what year. Check with him Bob

 

[Chupaca]

Why..!!

check with BajaRon and get the one that fits.. All RT's V-twins have the same bar. The triples have their own bar. The F3 has a different style frame...:dontknow:

 

[MikeP]

check with BajaRon and get the one that fits.. All RT's V-twins have the same bar. The triples have their own bar. The F3 has a different style frame...:dontknow:

Why???
1. Because a few folks have already done it ...
2. Because I have one layin around and if it fits WHY not use it...
Someone had stated previously that the F3 frame is the same..
The only difference being the outer frame stiffeners..

 

[MikeP]

I sent a PM to BAM and am waiting on his reply..

 

[Mike Ard]

BajaRon has one that fits the F3

 

[pauly1]

The 2014 and newer fit but are slightly larger in diameter and therefore about 70% stiffer than the stock F3. The bushings will need to be drill out to match the larger diameter. Order a set of 5/16 heim joint ends to replace the stock plastic links. Pm and I'll send you details next week when I get back in town.

Wayne

 

[Chupaca]

There you go. Now I know the why and that the frames are the same...thanks

 

[Nyparrothead]

The stock OEM swaybars for the RT and F3 have different part numbers... Curious how the aftermarket bars can be interchangeable?

mark

 

[BAM]

ive respond to your PM 2014 and up

 

[MikeP]

Thank you

 

[pauly1]

The stock OEM swaybars for the RT and F3 have different part numbers... Curious how the aftermarket bars can be interchangeable?

mark

They are different diameters, therefore, different part numbers. Mounting dimensions are the same. Wayne

 

[MikeP]

I was told by two people who should know,,, that the 13 and up RT sway bars bolt in to the F3.. I have a take off from my 13 so I will use that first n see if I need something stiffer... You have to use the bushings cause the bars ARE different diameter..

 

[jcthorne]

check with BajaRon and get the one that fits.. All RT's V-twins have the same bar. The triples have their own bar. The F3 has a different style frame...:dontknow:

Not true. 10 thru 12 use one, 13 to current use the other. 13 thru current fits and is an upgrade for the F3 but I bet Bajaron's is still superior.

 

[RPM]

Not true. 10 thru 12 use one, 13 to current use the other. 13 thru current fits and is an upgrade for the F3 but I bet Bajaron's is still superior.

Yes, I can say personally that the BajaRon Bar is better than the stock. Better cornering on a bike that was pretty damn good to begin with!

 

[jcthorne]

Yes, I can say personally that the BajaRon Bar is better than the stock. Better cornering on a bike that was pretty damn good to begin with!

What is the diameter of Bajaron's bar for the F3? I'd like to compare to the RT bar Lamonster installed on my new F3.

 

[RPM]

What is the diameter of Bajaron's bar for the F3? I'd like to compare to the RT bar Lamonster installed on my new F3.

You'd have to ask BajaRon as I didn't install the bar on my bike.