What fuse block are you using?

[IVSSpyder]

I want to add some Farkles but need an additional fuse block.
What are you using and where did you get it?

 

[BLUEKNIGHT911]

THIS ONE WORKS

I want to add some Farkles but need an additional fuse block.
What are you using and where did you get it?

Take your pick.....Look here ....SUMMITRACING.COM.........Maybe not fancy , but they work fine..............I think the only issue may be the price ..........they aren't EXPENSIVE :thumbup: :roflblack: :roflblack: :roflblack: :roflblack: :roflblack:....................Mike :thumbup::thumbup:

 

[eddieshep999]

Just upgraded to a new Spyder RT SE6 2015 MODEL

Had a 2010 RT- S SE5 Model before and used an FZ1 Fuseblock on it - Worked fine no issues but if a fuse blows you have to have access to it See :-

http://www.fuzeblocks.com/


Have decided to try the PDM60 for my new RT -No fuses to worry about and will work with the Can-Bus system see -

http://pdm60.com/

 

[Yfactor]

http://www.bikebandit.com/aftermark...e-electronics-pdm60-power-distribution-module

 

[coz]

FZ1

Fuzeblock. A little pricey, but a very nice, well made piece.

 

[TexasSpyder]

I use the FZ1from Tricled.

J. D.

 

[revjvegas]

Just upgraded to a new Spyder RT SE6 2015 MODEL

Had a 2010 RT- S SE5 Model before and used an FZ1 Fuseblock on it - Worked fine no issues but if a fuse blows you have to have access to it See :-

http://www.fuzeblocks.com/

+1 for the FZ1.
Got mine from Reg at TricLED. :thumbup:

 

[samewok]

I use the one from tricled works great.

 

[Trickie Dick]

Eastern Beaver

I used the Eastern Beaver PC8 on my GS. I switched to the 3 circuit solution on my RT. Good stuff.
http://easternbeaver.com/Main/mai,

 

[BLUEKNIGHT911]

FUSE BLOCK INFO

This is just an example of what they have ....Go to SUMMITRACING.COM........# 900171------This is a weather tight 6 fuse @15 amp each Fuse block for $12.99........they have 100 or so others to choose from.....( Hella , Bussman etc )........Mike :thumbup:

 

[SPYDERGUY1]

There are numerous blocks available, depending on you requirements and budget , you will have no problem, make sure to get one that is going to suit your purpose tho. Number of circuits being added.

 

[Spyda98]

another happy customer here w/ the Fuzeblock.

 

[IVSSpyder]

Thank's everyone for the information. I don't want to hurt the CanBus IF there is a short anywhere.