USB in rocker switch slot

[Wazoo]

Having only a RT A/C I have 2 open rocker switches on the dash. Has anyone engineered putting a USB outlet (preferrrably whether proof) in the empty rocker switch slot?

 

[spyryder]

Here's a thread posted just the other day should give you some ideas:

http://www.spyderlovers.com/forums/...SB-Plug-on-Rocker-Switches-Console-(Version-2)

 

[bullant12]

Here's a thread posted just the other day should give you some ideas:

http://www.spyderlovers.com/forums/...SB-Plug-on-Rocker-Switches-Console-(Version-2)

Thanks for reposting this!

Having only a RT A/C I have 2 open rocker switches on the dash. Has anyone engineered putting a USB outlet (preferrrably whether proof) in the empty rocker switch slot?

Here is the part: http://www.burnsmoto.com/waterproof-usb-charger-socket-panel-mount.php You might need to make the cable longer since they only sell it at 4 feet.

 

[GeekyRider]

Having only a RT A/C I have 2 open rocker switches on the dash. Has anyone engineered putting a USB outlet (preferrrably whether proof) in the empty rocker switch slot?

Wazoo, I was wondering if you were able to find a rectangled weather proofed usb switch for the rocker slot? @Bullant12 idea was brilliant but the previous owner had the CB kit inatalled and the circle in use, so I need to use the free bays on the right.

 

[Moosemanj]

Just bought the dual usb port for my RT from Lamonster's Garage. Just have to install it now.

 

[The Governor]

I did this....

 

[GeekyRider]

I did this....

That's a pretty cool location to have it, but I have a cellphone holder that will not work for me as the cable will go outside and may bend the rubber seal.

 

[GeekyRider]

Just bought the dual usb port for my RT from Lamonster's Garage. Just have to install it now.

Did you buy the spyder dock or does he has a usb port that would fit the switch bay?

http://www.lamonstergarage.com/lamonster-spyderdock-with-12v-cig-usb/

 

[jthornton]

Having only a RT A/C I have 2 open rocker switches on the dash. Has anyone engineered putting a USB outlet (preferrrably whether proof) in the empty rocker switch slot?

The one that goes in the rocker switch location are only weather proof when not in use. The USB+12v I have comes with a weather proof in use cover for one cable.

JT

 

[Kredab]

I was going to do this but a few posts said I might screw up the rubber seal, wasn't sure that was a big deal , what have you experienced ? How tough was it to get the nut tightened on the power plug ? Where did you hook the wire to ? direct battery ? Any info you could give me will be helpful .....thanks for your post
:spyder2::spyder2:

That's a pretty cool location to have it, but I have a cellphone holder that will not work for me as the cable will go outside and may bend the rubber seal.

 

[JimVonBaden]

The one that goes in the rocker switch location are only weather proof when not in use. The USB+12v I have comes with a weather proof in use cover for one cable.

JT

Technically true, but I have used mine in the rain lots of times. Low voltage doesn't conduct in water very well.

Amazon $12.

https://www.amazon.com/gp/product/B010T3D1CQ/ref=oh_aui_detailpage_o07_s00?ie=UTF8&psc=1

 

[IdahoMtnSpyder]

Technically true, but I have used mine in the rain lots of times. Low voltage doesn't conduct in water very well..

That's not the concern. Corrosion of those tiny contacts is.


Sent from my SM-T350 using Tapatalk

 

[finless]

In my opinion this is the best way.
It matches the switches in the center, has a rubber plug when not in use, etc....

This post shows it on the right but with some plastic trimming you can put it in the middle perfectly and it looks factory!

http://www.spyderlovers.com/forums/showthread.php?84850-USB-Power-in-RT-Switch-Cluster


Bob

 

[JimVonBaden]

That's not the concern. Corrosion of those tiny contacts is.


Sent from my SM-T350 using Tapatalk

Possibly​, but a little dielectric grease fixes that.

 

[WilderThomas]

Empty Rocker Switch Slot

Having only a RT A/C I have 2 open rocker switches on the dash. Has anyone engineered putting a USB outlet (preferrrably whether proof) in the empty rocker switch slot?

Check out JT's Spyder Store for a product called, Carchet Car 3.1. It's a dual USB power outlet that fits in the center empty rocker switch slot. Looks like original equipment manufacture when installed. Has blue illumination, making it visible at night.

 

[JimVonBaden]

Check out JT's Spyder Store for a product called, Carchet Car 3.1. It's a dual USB power outlet that fits in the center empty rocker switch slot. Looks like original equipment manufacture when installed. Has blue illumination, making it visible at night.

Same as I posted above from Amazon for $6 cheaper.

 

[fastfraser]

How about a dual USB charger with a battery gauge ?

 

[finless]

View attachment 142762How about a dual USB charger with a battery gauge ?View attachment 142761

That's cool! Where did you get that please?

Bob

 

[Jetfixer]

This is what you want

This is the exact part you need for what you describe. It is made by the same manufacturer as the switches and will fit those slots without any cutting. Enjoy!

http://www.panbo.com/assets_c/2014/11/Carling_V-Charger_USB_2_aPanbo-10197.html

 

[DJFaninTN]

for all you Amazon Folks out there

https://www.amazon.com/Socket-voltmeter-Carling-switch-standard/dp/B01HOL26G8/ref=sr_1_18?ie=UTF8&qid=1485127100&sr=8-18&keywords=usb+with+voltage+meter

or you can get it in RED
https://www.amazon.com/E-Bro®-Charg...7342&sr=8-149&keywords=usb+with+voltage+meter