• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Spring Ryde

retread

retread

New member
Okay, this is something that I haven't done much of, at least not for a group, so please bear with me. This is based on an article in Rider Magazine from September, 2008.
I'm trying to put together a one day ryde, or several of them, to parts of southern Indiana, staying off the beaten path as much as possible. So here it goes.

Meet early, at a convenient spot on State Road 135, someplace in Greenwood.
Go south on 135 to Nashville, maybe stop and "go tourist" for a while, there's a good coffee shop there.
Continue south to 46, turn east for about 2 miles then south on 135 again through Story, Freetown, Medora, Millport, Kossuth, Salem, Palmyra, and Corydon to Mauckport.
We've got time to make plans, or play it by ear, quite a few of these places have things to see and "picture ops". I don't plan on hurrying, and I'd like to keep it to one day. I'll try to get more info as to where things are and so forth.
From Mauckport, north to Corydon on 135, then west on 62 to Leavenworth, then to 145. North on 145, then a side trip a little bit west to Siberia, then to Birdseye, then 150 to French Lick, Prospect and Shoals. Take 50 to Bedford, then 58 to Heltonville, 446 to Bloomington, we'll cross a lake on the way.
446 to 46, east to N. Smith Road to SR 45 to N. Lick Creek Road, left to 135 in Morgantown. Between Bloomington and Morgantown there's pretty much nothing but road, but it's nice and crooked.

As near as I can figure, if we do the whole thing at once, this is going to be a 350 to 360 mile trip, but as I said, this can be 1 day, or several, any thoughts or input would be welcome.


john
 
John,
just saw your mention of this post on main board. Count me in for this and will be willing to help with any planning, logistics etc. I live in Carmel and will be a new spyder rider as soon as the weather improves. I have a red se waiting for me at the dealers. looking forward to meeting you and others in the near future. :2excited:

Dick
 
I've done some checking on the route, I'm not sure about Mauckport, under the Ohio River bridge, not much to see except the river. I'll be going through the whole thing, getting some estimates on times and places of interest. May have to make this a 2 day thing, depending on sightseeing and meals, etc.

john
 
Hey, count me in, as long as work schedule permits. If not, maybe I can meet up with ya on your route somewhere for lunch? Keep us posted.
 
I'm real flexible as far as time is concerned, my daughter will house-sit, so I've got no worries there. I've checked the route down to Mauckport, from Morgantown to Salem the road is really interesting, from Salem to Corydon, they straightened it out. I'm planning on checking Corydon to Siberia later this week, and then the rest of the trip a few days after that. I need to check for places to eat, take pics, and so on, thinking of a vidcam to tape this too. Any ideas are very welcome.

john
 
I am flexible as well as to the schedule. Im sure I can work it in. Not familiar with that part of the state so looking forward to trip. By the same token, I won't be of any help in the route planning. Anything else, though, John I will be glad to help. I am retired so I have the time.
 
Seems like every time I plan on a run to check things out, other thing pop up, I'm going to try to make the whole run tomorrow, get some idea of the time involved, food, picture taking places, and so on. Hopefully there won't be any surprises. More later.

john
 
I've been pretty busy, between the Spyder and other odd jobs for friends, haven't had a chance to check out the route for sure, hope to get to it this week, the way things are going, no guarantees, but I'll try.

john
 
retread said:
I've been pretty busy, between the Spyder and other odd jobs for friends, haven't had a chance to check out the route for sure, hope to get to it this week, the way things are going, no guarantees, but I'll try.

john
Click to expand...

I'll keep checking back. No problem. Let me know if I can do anything. :popcorn:

Did you get your riser kit installed? Looking forward to seeing it before I consider ordering one. I'm pretty tall so not sure about it.
 
Risers are in, got to adjust them, but highway pegs and 12 volt outlets are going on first while the tupperware is off. I didn't get as much done as I wanted to, so rainy days are going to be busy.

john
 
retread said:
Risers are in, got to adjust them, but highway pegs and 12 volt outlets are going on first while the tupperware is off. I didn't get as much done as I wanted to, so rainy days are going to be busy.

john
Click to expand...

are you using the NMN pegs? and where are you putting the outlets? Going with a fusebox?

Sorry to be so nosey, These are things I want to put on my spyder as well? You have alot more experience than I.
 
Got the Kewlmetal mounts, Kuryaken pegs, outlets going in under instruments. Trying to figure out a good place to mount 2 six circuit fuse blocks, 1 switched, 1 unswitched, couldn't find anything smaller than 6, don't think I'll use more than 2 or 3 of each, but I'd rather be looking at it than for it. Getting to the point I think I've developed an Exlax touch; everything I've started turns to crap.

john
 
Sounds like you need to try some of your own medicine-the mocha vodka valium latte.

can't help you on the fuse blocks. I think I am going with the eastern beaver pc-8 when it comes out next month. I imagine you already know about it. Any reason for going with kewlmetal brackets instead of the NMN? From what I read, the NMN set is for longer legs, which is what I need.
Am I wrong? :dontknow:
 
The Kewlmetal tie into the motor mounts, much stronger. What is the pc-8? Haven't heard anthing about it.

john
 
You can see the PC-8 on easternbeaver.com under fuse panels. They have the BMW style outlets as well. Lots of electrical stuff for motorcycles.

Have to look into the kewlmetal mounts a little more closely.
Dick
 
retread said:
The Kewlmetal tie into the motor mounts, much stronger. What is the pc-8? Haven't heard anthing about it.

john
Click to expand...

John, been looking at the kewlmetal brackets. Don,t see any installation instructions anywhere. How difficult are they to install?
Looks like they are in about the same location as the NMN set so foot location should be close to the same:dontknow:
 
You must log in or register to reply here.

Similar threads

Snoking1127
Kitt Peak - Mount Lemon two day ride
Replies
1
Views
105
Snoking1127
Snoking1127
N
To Wenatchee and back.
Replies
4
Views
228
ned64
N
N
My Saturday ride up the Yakima River Canyon and beyond.
Replies
1
Views
167
Snoking1127
Snoking1127
N
Over White Pass, back Snoqualmie Pass
Replies
1
Views
91
Snoking1127
Snoking1127
Y
Is a rear suspension upgrade needed. 2017 RT
Replies
3
Views
657
Yspyder
Y
Back
Top