Shortie advice

[Brettssunshine]

So...I'm seriously looking now for an F3. I went to a dealer today and asked some questions. I learned that, because I'm short, I will need my pegs in the #2 position (~$50) and I will also need to spend $450 to switch the handlebars in order to get me to the A position. Seriously? I'm spending all of this $$$$ and I have to pay to switch the stock bars? I thought this was a UFIT system and it was all part of the cost of your new F3?!

is there another option for the handlebars?

 

[ARtraveler]

I am thinking the dealer should eat any costs of making the :spyder2: fit you. It should be part of the deal. Let me guess, MSRP for the price?

 

[Brettssunshine]

I haven't talked prices yet, still just feeling the different dealers out. This conversation took place at a grand opening in PA.

 

[Michaelscs]

I'm tall and my dealer switched mine to fit me at no cost.
And even if you do have to pay for different bars they are only $150, not $450.

 

[smokedtires]

They were happy change anything I wanted for a cost. There should be a disclaimer on Can Ams website that says, yes this will fit you but be prepared to pay another $500 on top of the cost of the bike if you aren't average size.

 

[cuznjohn]

this is the one reason i felt that you should be able to buy a bike like you order a car. when i bought my rt, i ordered the comfort seat. i paid for the seat, but they installed it for free

 

[Bob Denman]

I'm tall and my dealer switched mine to fit me at no cost.
And even if you do have to pay for different bars they are only $150, not $450.

:agree: The chrome handlebars might be that high... the Black ones certainly aren't! nojoke

When I was getting my Missus fitted for an F3-Limited; she ended up needing the shortest possible reach bars, and the floorboards mounted in the number one position. (The dealer would just swap out the parts, and make the bike fit her for NO extra charge!)

 

[Leeallen1111]

Got the parts for free and $90 install fee. Was OK with that - got them down $4500 off MSRO


Sent from my iPhone using Tapatalk

 

[Chupaca]

Oh no..!!

Looks like you need to start doing some negociating... it should be set up to fit you, now after purchase it's your dime. If they won't you may have to check a few other dealers...:thumbup:

 

[Tango]

So...I'm seriously looking now for an F3. I went to a dealer today and asked some questions. I learned that, because I'm short, I will need my pegs in the #2 position (~$50) and I will also need to spend $450 to switch the handlebars in order to get me to the A position. Seriously? I'm spending all of this $$$$ and I have to pay to switch the stock bars? I thought this was a UFIT system and it was all part of the cost of your new F3?!

is there another option for the handlebars?

You went to the wrong stealer, I mean dealer. :gaah: Motorsports Inc. DID NOT CHARGE to switch bars, or positions! That's why they call it a "UFIT" system. You get the right sizes, for lack of a better word, for FREE! What discount on accessories did they offer? And installs? BTW, I got the #2 position, and the furthest A pull back bars also. But, it's good that you shopped around. Now. Go see Tammy. Great staff, awesome prices! nojoke Tom :spyder:

 

[Brettssunshine]

I went to the grand opening of Brooks Powersports near Hershey today. I won't pay that to change the bars. :shocked:

 

[al0vely]

So...I'm seriously looking now for an F3. I went to a dealer today and asked some questions. I learned that, because I'm short, I will need my pegs in the #2 position (~$50) and I will also need to spend $450 to switch the handlebars in order to get me to the A position. Seriously? I'm spending all of this $$$$ and I have to pay to switch the stock bars? I thought this was a UFIT system and it was all part of the cost of your new F3?!

is there another option for the handlebars?

Are you saying they will charge to adjust the pegs?

I had an adjustment on my boards today on my F3L and they didn't charge me anything. If your answer is yes to my question RUN don't walk from that dealer.

Just from reading this forum there appear to be dealers who will negotiate and deliver the bike to your door.

 

[Brettssunshine]

Are you saying they will charge to adjust the pegs?

I had an adjustment on my boards today on my F3L and they didn't charge me anything. If your answer is yes to my question RUN don't walk from that dealer.

Just from reading this forum there appear to be dealers who will negotiate and deliver the bike to your door.

That at is the approximate cost of the linkage that I will need to get my pegs in the #2 position at this particular dealer. I'm glad to know that this isn't a common practice at most of the dealers. I just couldn't believe I would have to pay that much to get a new Spyder to fit me.

 

[Tango]

I went to the grand opening of Brooks Powersports near Hershey today. I won't pay that to change the bars. :shocked:

Good for you! :clap: Now run away from that dealer! :yikes: Tom :spyder:

 

[pdxsenior]

I'm 5' and 110lbs. My dealer didn't charge me anywhere near that for the shortest brake rod and longest handlebar. Some this is bit "fishy" with that dealer!

15' F3S SE6 owner

 

[ARtraveler]

Let us know what actually happens when its time. Sounds like the new dealer either "didn't know" or they were "dialing for more dollars."

Either way, I would avoid the dealer unless they "fess up" and make it right. Time for some pain and suffering like extended warranty, free initial service (3000 mile variety), or maybe a farkle or two.

:bbq::bbq:

 

[siny10309]

That at is the approximate cost of the linkage that I will need to get my pegs in the #2 position at this particular dealer. I'm glad to know that this isn't a common practice at most of the dealers. I just couldn't believe I would have to pay that much to get a new Spyder to fit me.

The dealer is paying for the bars so one way or another you will too. He is either going to charge you more for the bike and change them for "free" or give you a better deal on the cost of the bike and charge you for the bars. just my .2

Everyone is so quick to jump down the dealer's throats!

Also, the $450 is for chrome. Go for black like stock and will be much less. $150 I believe

 

[seadoomaiden]

Have you sat & test drive the bike? I'm <5'2" and the first time I rode it with the settings they had, I initially felt like my arms were stretched out. But the second time around, I felt really comfortable like I melted into the seat. I haven't changed bars or settings at all. But it's your ride, you need to find your comfort.

 

[Pirate looks at --]

Ok

:agree: The chrome handlebars might be that high... the Black ones certainly aren't! nojoke

When I was getting my Missus fitted for an F3-Limited; she ended up needing the shortest possible reach bars, and the floorboards mounted in the number one position. (The dealer would just swap out the parts, and make the bike fit her for NO extra charge!)

So where are the pics of the F3L.......remember it will be for your wife.....until you ryde it....the :yes::yes::yes:........it will be yours! Too much fun to not ryde!

 

[TommyBwell]

The dealers are not compensated for the parts or labor to change the handlebars or foot pegs and many, probably most, dealers do not have all the different handlebars and brake/shift rods in stock. As stated one way or another you will be paying for it. No need to get mad at the dealers.