Riser MSRP is in! Pre-orders now being accepted

[Magic Man]

http://www.spyderlovers.com/forums/showthread.php?t=7518

 

[hevnbound]

4" on order ... can't wait!! :yes:

'Till then I guess I'll have to live with these! :yikes: :2thumbs:

 

[dbnc]

We got the final figures in today and have the MSRP for the risers finalized! :yes::2excited:

The 3 inch riser kit will have an MSRP of $199.00
The 4 inch riser kit will have an MSRP of $209.00

We hope to have units here in the next 3 weeks and will keep everyone up to date on this schedule.

Pre-orders are now being accepted and will be on a first come first serve basis to be fair to everyone.

Sorry, but posted responses of.... "I want one etc" can't be counted in being fair to everyone.

MM

So, if you'd like to reserve a set out of this first run please just give us a call.

After the first run is done, the next units will arrive in about 4 to 5 more weeks.

Will these work if you already have he brp 1 in risers already installed??

 

[Magic Man]

Will these work if you already have he brp 1 in risers already installed??

Yes they will! :thumbup:

I have the BRP kit on my Spyder in the photos.

That is what the 3 inch kit is for people who have the BRP kit already.

The 4 inch kit is for people who do not have the BRP riser kit installed.

That way the bars will be in the same place and work with the stock cables ether way.


MM

 

[trikester]

Please show us a photo of your riser (either one) installed on the Spyder.

 

[dltang]

I left a message and placed my order. I can't wait. Especially if I get the floorboards I want installed the way I want them. This will become an even more comfortable ride. I am excited.
Deb

P.S. bjt, I used my allowance to order.

 

[Lamonster]

Please show us a photo of your riser (either one) installed on the Spyder.

http://www.spyderlovers.com/forums/showthread.php?t=6025

 

[Twodog185]

The phone is busy...had to use Google maps, street view to find the name of the hotel at the corner (Comfort Suites)...called them and had them deliver a note for Magic Man to call ME!!!!!

:2thumbs:

You do what it takes....end of story.

 

[pzim]

Just got off the phone with Magic Man! MINE ARE ORDERED TOOOOO:2thumbs:
Sounds like they are real busy taking orders as fast as they can dial the return phone calls!
Great work guys!Sounds like the install should be a breeze:clap:
Can't Wait:yes::yes::yes:
PZIM

 

[Sopher]

I have not seen details:
Do you HAVE to cut your own bars or do you supply a replacements?
Can you use your 4" risers with the BRP 1" to give you 5"

(i'll see your 1 and raise you 4!)

 

[Spanky]

I Just talked to Magic Man and ordered the 4 inch.

Nice guy, he wants make sure you know exactly what you are getting.

:2thumbs: :spyder:

 

[dabreitbach]

Just ordered mine. That is the last thing I needed.:2thumbs:

 

[scottmanesis]

Scott, Yes I have seen those, thank you. They are very cool but still a bit farther apart than I am looking for. I have short legs. I have picked out my boards and the angle and area I want to put them. I have to get with my husband when the boards get here and figure out the best way to mount them. Combined with the riser kit and a passenger bag I found, this may become one of the most comfortable spyders out there IMHO

This bag I am referring too is called the Biker Friend and it comes with a backrest for the driver. Here is the site http://www.bikersfriend.com/

I have a similar bag without the backrest part though........it holds alot more than you would think! Mine is a Harley Davidson SAC bag....and it cost me more money than that one without a backrest

 

[Lamonster]

Mine are on :thumbup:

 

[COSpyder]

I have not seen details:
Do you HAVE to cut your own bars or do you supply a replacements?
Can you use your 4" risers with the BRP 1" to give you 5"

(i'll see your 1 and raise you 4!)

I have the same question. I was not thinking about the 1" riser when I ordered the 4" risers for the bars. Will this work? I can use all the rise I can get so I hope the answer is yes.

 

[Magic Man]

I have the same question. I was not thinking about the 1" riser when I ordered the 4" risers for the bars. Will this work? I can use all the rise I can get so I hope the answer is yes.

We have not tested the 4 inch riser on top of the 1 inch BRP set up. as I fear the cables willbe stressed to much.

If you ordered the 4 inch and need the 3 inch just give us a call, no problem to change.

MM

 

[Lamonster]

I have not seen details:
Do you HAVE to cut your own bars or do you supply a replacements?
Can you use your 4" risers with the BRP 1" to give you 5"

(i'll see your 1 and raise you 4!)

Yes you do have to cut your stock bars. It can be cut with a hack saw or small pipe cutter. There's a cap that goes in the end of the bar you cut off. You can install the risers and try them without cutting your bars at all if you are concerned about not liking them. I'm sure somebody will buy them off of you.

This is a true 3" or 4" rise from stock, not a 5" rise bar that may only be 3" from stock depending where the messurement it taken. I don't see you getting much more than 4" of rise with the stock cables.

On another note. I just got back from a little ride to town and I love the look and feel of these new risers. I can't wait to ride to Sturgis and then San Diego in a couple of weeks. I pretty much have everything dialed in now. :doorag:

 

[bjt]

I pretty much have everything dialed in now. :doorag:

I've heard that before... :joke:

 

[Lamonster]

I've heard that before... :joke:

Hey, this is my last mod, I'm done now.

 

[Sopher]

I think what would help me is buying a new handle bar and cut THAT to use with MM's product. I plan on getting new Kury grips anyway.
MM do you or anyone sell a suitable replacment bar that can be cut to use with your risers? If this is not the place, please send me a PM.
Thanks