Hello everyone! I am wanting to replace the BRP emblems on my spyder with something else. My question is are the BRP emblems removabel? and what is the procedure. I will look at it tomorrow, but thought maybe someone has already taken their's off. Any info will be much appreciated!! :helpsmilie:
-
There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.
Quick Question about BRP emblems
- Thread starter Bullet24
- Start date
Yes the brp emblems are removeable. heat them up with a hair dryer but dont get to close too spydee cause youll burn the paint, just heat enough to soften the glue. with that said they will not be reusable, I replaced mine with spyders.hyea:
Nice, Thanks for the info!
.jpg)
Thanks for the info, I may and try to do something custom tho. :spyder:
Guess I will be buying the kids a popsicle :shemademe_smilie:. Thanks for the tip!
SpyderWolf
New member
I was very careful with a flat tip screwdriver. The glue that BRP used is very thick, and may take you a while to get the majority of it off. The trick to getting something custom is to find the right size, I believe it is 2.75 inches, but you are definitely going to want to measure first.
My avatar shows what I did with the front one, but I have not been able to find a replacement for the rear one yet.
My avatar shows what I did with the front one, but I have not been able to find a replacement for the rear one yet.
Painter Dan
New member
2.75 is right. I've made a couple. Be really careful not to chip the paint it's easy to do.:2thumbs:
Fire Joe
MOgang Member
Are the ones you made the gel coated type, like what's on there now? Hmm maybe we could squeeze in yet another detail on my Spyder with new emblems :roflblack:
I used the hair dryer too, and it works great. Just a word of warning. If the Spyder (or paint job) is old; the paint under the decals will be new looking, and will be very noticeable (don't ask how I found out). I am going to take mine off this weekend, as I just bought my Spyder.Yes the brp emblems are removeable. heat them up with a hair dryer but dont get to close too spydee cause youll burn the paint, just heat enough to soften the glue. with that said they will not be reusable, I replaced mine with spyders.
Fire Joe
MOgang Member
I just went down to the garage and checked mine and the rear emblem is smaller than the front one.
Painter Dan
New member
Joe, The ones I made were aluminum and I painted them. They are on Bumblebee's Spyder. Let me know if your interested.
Bullet24, I think they are but you should measure.:doorag:
SpyderWolf
New member
No, the rear emblem is much smaller than the front one.
Painter Dan
New member
I was thinking of the RT. The emblem on the back is the same on an RT I think.
SpyderWolf
New member
Oh, that would make life so much easier as then I could have gotten a matching emblem for the rear. :thumbup: So far I have not been able to find one small enough, so that piece of BRP branding is still in place.
Thank you, I like this one :2thumbs:
That is a good one! I wanted to try and use the kuryakyn zombie medallions in place of the BRP logo, but I think their large one is only 2". It may fit the back tho? I'll have to measure. Anybody know of other emblems readily available? Not interested in the spyder ones, seems a lot of people have em. I want like a skull or something like that.
