trikermutha
Active member
Well looks like Power Commander has a power module for the 1330 now. Has anyone bought on yet? Yep its a bit pricey.
-
There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.
Power Commander
- Thread starter trikermutha
- Start date
ARtraveler
R.I.P. Dwayne
opcorn:opcorn:opcorn:
trikermutha
Active member
For the F3 models too.
trikermutha
Active member
The power commander works well. I did notice the glove box area is cooler than before. Its only been two days now have to get Gas age checked on next fill up runs smooth and strong. I don't expect any big increases on the MPG if any at all.
The instructions were for a F3 . Had to fiqure out how to install on the RT. Pretty simple once done.
The instructions were for a F3 . Had to fiqure out how to install on the RT. Pretty simple once done.
trikermutha
Active member
No Nanny problems and now have over 300 miles on the Commander.
Not sure about any gains yet as I am running a tune that was provided with the Power Commander. Like to get one more for the Stock RT
Not sure about any gains yet as I am running a tune that was provided with the Power Commander. Like to get one more for the Stock RT
PaladinLV
New member
Living here in Las Vegas, my Spyder is one of two (mine is an RT-S) being used as a "test bed" for the Power Commander.
The data has not yet been collected by DynoJet so can't give you details.
There is no interference with ANY Spyder systems whether working or should it fail.
The mixture runs richer; and there is a noticeable improvement in mid range acceleration.
No effect on MPG in either direction.
I'm running an Akrapovic with Cat-Bypass.
They will be collecting the data soon and adjusting as necessary.
Didn't think the RT version was released to the public yet.
AJ
The data has not yet been collected by DynoJet so can't give you details.
There is no interference with ANY Spyder systems whether working or should it fail.
The mixture runs richer; and there is a noticeable improvement in mid range acceleration.
No effect on MPG in either direction.
I'm running an Akrapovic with Cat-Bypass.
They will be collecting the data soon and adjusting as necessary.
Didn't think the RT version was released to the public yet.
AJ
trikermutha
Active member
No RT download yet just the F3 version and there instructions are for a F3 not RT. So you have to also fiqure out the right ECM port and where the O2 connection is located and power connections. Which I ended up finding out when I installed mine
Last edited:
PaladinLV
New member
Here's the installation on my 2014 RT-S.
Downloads for RT are available but they are still testing and not quite ready to release.
AJ
Attachments
PaladinLV
New member
Only 2K - lol
Put on 5K since install.
I gave them instructions on how to Dyno the Spyder. Don't know if they tried it yet.
I'll be going back next month for them to download the data from my unit.
AJ
Put on 5K since install.
I gave them instructions on how to Dyno the Spyder. Don't know if they tried it yet.
I'll be going back next month for them to download the data from my unit.
AJ
trikermutha
Active member
Here's the installation on my 2014 RT-S.
Downloads for RT are available but they are still testing and not quite ready to release.
AJ
Got mine installed just like yours. There is also a module to hook up on the O2 sensor connector.
Hope to see the RT Data posted soon. I am running the F3 data right now..No problems running it so far. I only have 300 miles since install of the commander
trikermutha
Active member
So I am using your data in my RT ..Seems to be good so far :thumbup:
You guys got lucky living close to Dyno jet..Free stuff :thumbup:
They need pictures on the RT installation would make it easier for future installs. As you see the module is turned versus the F3 and the instructions state to put the connector on the left port of the ECU. Which is the right on a RT
Last edited:
PaladinLV
New member
Technically, since both engines and sensors are the same the difference comes from the exhaust system and although different negligible.
The biggest differences come from the exhaust systems hooked up.
AJ
The biggest differences come from the exhaust systems hooked up.
AJ
trikermutha
Active member
Yep same engine bit heaver from one to the other
I would prefer a tuner but take what I can for now.
Similar threads
