NEW RT WINDSHIELDS

[Magic Man]

I think it would be very helpful to know just how tall Pattie is... With all the descriptive information, it's difficult to apply the info to others. For example. My wife, Kim, has her own RT..Her windshield is too tall in the lowered position for her to look over it. She is 5'9" and wants to be able, at times, to see over her wind screen. I'm very interested in one of your windshields .. after knowing a little more stuff. We need some correlation as to how these windshields will fit others based on their height... Thanks, Len

A persons height, although somewhat helpful tells nothing about the shield. Reason being a person 5'7" who is all legs will sit on a machine different than a person who is 5'7" yet has a short inseam and legs.

Even the thickness of a person's bottom can effect how they will sit on a bike. :shocked:pps:

The shields measure a full 3 inches shorter than stock in the dead center top top bottom. The stock one is 27 inches.

Our short version is 24 inches long top to bottom in the dead center of the shield and the GTS version is 30 inches.

Have your wife sit on the bike measure down 3 inches on the stock shield, than use a thin strip a masking tape to make a line accross the top at 3 inches. This will give you an idea of where the top of the sport shield will be.

Patti' is about 5'5", but how her leg to waist ratio is to your wife's I can not say?

MM

 

[Jornie1]

Height Question

An excellent point I must say. I figured that question would arise. However, knowing Patti is 5'5" gives me an excellent place to begin a comparison. What Kim is wanting is the ability to look over or look through.. Thanks Magic.. Len

A persons height, although somewhat helpful tells nothing about the shield. Reason being a person 5'7" who is all legs will sit on a machine different than a person who is 5'7" yet has a short inseam and legs.

Even the thickness of a person's bottom can effect how they will sit on a bike. :shocked:pps:

The shields measure a full 3 inches shorter than stock in the dead center top top bottom. The stock one is 27 inches.

Our short version is 24 inches long top to bottom in the dead center of the shield and the GTS version is 30 inches.

Have your wife sit on the bike measure down 3 inches on the stock shield, than use a thin strip a masking tape to make a line accross the top at 3 inches. This will give you an idea of where the top of the sport shield will be.

Patti' is about 5'5", but how her leg to waist ratio is to your wife's I can not say?

MM