-
There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.
My Left Front Fender Light is not working - any ideas?
- Thread starter ricford
- Start date
DGoebel
Well-known member
What year and model Spyder?
Also, you might check out the Sticky Thread - A Request Passed On To All - Add your Spyder Year/model to your Sig Line!
It's in the Spyder General Discussion area, and here's a link - post #4 gives you the steps needed:
https://www.spyderlovers.com/forums...l-Add-your-Spyder-Year-model-to-your-Sig-Line!
Also, you might check out the Sticky Thread - A Request Passed On To All - Add your Spyder Year/model to your Sig Line!
It's in the Spyder General Discussion area, and here's a link - post #4 gives you the steps needed:
https://www.spyderlovers.com/forums...l-Add-your-Spyder-Year-model-to-your-Sig-Line!
Last edited by a moderator:
Bfromla
Well-known member
In his profile info: 2014 Can-Am Spyder RT & that would be led lamp, so not likely bulb 
opcorn: what other lights affected?
** & on another thread Ric asking about F3
https://www.spyderlovers.com/forums/showthread.php?161054-How-should-I-mount-a
, sorry yes confusion **
opcorn: what other lights affected?** & on another thread Ric asking about F3
https://www.spyderlovers.com/forums/showthread.php?161054-How-should-I-mount-a
, sorry yes confusion **
Last edited:
Deanna777
Well-known member
ricford,
Check your wiring.
Is there anything rubbing against the wiring - a screw, or anything sharp?
Are your wiring connections tight/secured together?
Are your wiring connections loose?
Is your bulb loose?
You might want to remove the left front fender to get to the wiring and bulb, that will be a lot easier.
Deanna
Last edited by a moderator:
ricford
New member
No satisfaction. I've tried a dozen times to change to my correct email and add the information, but I get a failure. I've even messaged the admin about the email error but no change.
I appreciate your suggestion, but I can't get it to work.
Thanks
Ric Crawford
Calhoun LA
I appreciate your suggestion, but I can't get it to work.
Thanks
Ric Crawford
Calhoun LA
Last edited by a moderator:
Mikey
Well-known member
Never checked but is there a connector on that wiring from the fender to the bike somewhere that could be accessed easily to test the wires in the fender instead of taking the fender completely off? And you could test the incoming power the other way! From the picture in your avatar, you have put some lights on that ride of yours! Where did you tap into to get that power?
Last edited:
RapidSpyder
Well-known member
My right side one went out too. I used to be able to tap it and make it come on, but that no longer works. I think it’s the wiring going into the unit so ordered a new one. I’ll send it back after I open it up if I can fix this one.
Have you tried to Edit/upgrade your email address via the 'Settings' button up in the Top Right corner of the page (just inboard of the 'Log Out' button) & then checked that you've got all the 'display signature' buttons ticked in there and your profile by clicking on the various 'edit profile', 'edit signature' options down the left side of that screen; AND ticked the 'Show Signature' box under 'Thread Display Options' that's about 2/3rds of the way down the list displayed after you click on the 'General Settings' button that's further down the left hand column & under the group 'My Account' title? :dontknow: There's lots of places that all hafta be ticked to show your sig line once you've added it! :sour:
Or you could always add a Spyder Garage entry & tick the box in there that adds a link to your Garage entry to your sig line & displays your Spyder's year & model as entered there?!
Last edited:
RapidSpyder
Well-known member
Mine was due to a burnt out circuit board. Must have gotten some moisture in there. Replaced in less than 30 minutes.
Hmmm, your signature is now showing OK, at least for me?! And your registration now shows you as being a Registered User instead of an 'Invalid email' registration, but there's still 'Invalid email' ticked in the classification listing?! I can't see if anything has 'changed' recently in there, I can only see what it currently shows, but it does show you with a yahoo email address - I take it that's the old address?? :dontknow:
It might be best to take this to PM.
Similar threads
