Mode button?

[larrymz3]

My bike used to star right up when pressing the mode switch on the handlebar.

Since I took the bike in to the dealer to complete a few outstanding campaigns last week I have to press the mode button on the dash.

Is there a setting to change it back to the handlebar switch?


Sent from my iPad using Tapatalk HD

 

[larrymz3]

Bike is an 08 Spyder GS SE5


Sent from my iPad using Tapatalk HD

 

[wyliec]

They should both work. One doesn't override the other; there is no switch to change which one works..

 

[BLUEKNIGHT911]

THE " MODE " BUTTON

I have noticed on my 08 G/S that it is pretty fussy about " exactly " how long you press and hold the button before it will start.!!!..Mike :thumbup:

 

[pro10is]

I have noticed on my 08 G/S that it is pretty fussy about " exactly " how long you press and hold the button before it will start.!!!..Mike :thumbup:

Mike is right, if I don't hold the Mode button long enough on my 2011 RS-S the ECC won't acknowledge it. It doesn't say in the owner's manual that you have to hold the button down any specific length of time but, at least on mine, a quick press won't work.

 

[KipDM]

when i first got my 2011 RS it was a 'tad' bit finicky about how long you pressed it.
until my dumb :cus: realized Press doesn't mean HOLD.
but if you press for more than about 1/4 second it does not register.
so it might be getting a little sensitive on time of the tap.....just my guess.

 

[wyliec]

Check out post #3 here: http://www.spyderlovers.com/forums/...quot-M-quot-button-on-panel&highlight=magnets

The problem others have had was with the 'M' button on the dash. I believe it was Lamont that first came up with the magnets in the switch as being a problem. :dontknow: