• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Mobile one full synthetic race oil

OIL

Has anyone used Mobile One Full Synthetic race oil for motorcycles with a wet clutch system?

Yes, I use the Mobil 1 Motorcycle oil in the 10W40 weight. It is fully JASO/MA certified and meets or exceeds all requirements for motorcycle transmissions as well as wet clutches. Can't go wrong with that one.:thumbup:


Michael:doorag:
 
Have it in both Valkyries, and I believe they shift better. Suspect it will be in the Spyder next time.
 
I'm not real happy with the oil BRP uses either.. I plan on going to a Full Sythetic and it will probably be Mobile One Full Synthetic race oil for motorcycles.. Remember Lee the Tech is at Cowtown today so maybe that would be a question for him, or maybe not right?? With the Cold setting in soon and I am more likely not going to ride it near as much now I may wait till Summer comes around, What do you think?

Joe
 
I just switched to 10w-40 Amsoil and noticed a significant difference in the shifting. Much smoother now. I think it's hard too go wrong with any of the full synthetics and I was a bit disappointed to see BRP switch to the blend, which is why I switched.
 
I use Castrol Power RS R4 fully synthetic 5W-40 - only oil I could find (probably others avaliable) that meets the letter of the law according to BRP- as noted in owner's manual. Which might be important if you ever have an engine warranty issue and you choose to do your own oil changes.

To me it is not a matter of what oil works well in the Spyder - it is what oil keeps it compliant with warranty.

BRP violates their own warranty by only providing and directing their dealers to use BRP blended oil. :lecturef_smilie: Go figure.
 
I use Castrol Power RS R4 fully synthetic 5W-40 - only oil I could find (probably others avaliable) that meets the letter of the law according to BRP- as noted in owner's manual. Which might be important if you ever have an engine warranty issue and you choose to do your own oil changes.

To me it is not a matter of what oil works well in the Spyder - it is what oil keeps it compliant with warranty.

BRP violates their own warranty by only providing and directing their dealers to use BRP blended oil. :lecturef_smilie: Go figure.

I bought a bunch of the 'old' full-syn BRP oil that meets 'the book' requirements--- for $7.00 a quart.

The new blend sucks IMO.

I believe the Castrol Power RS R4 fully synthetic 5W-40 is a good contender for what BRP was actually selling as their own full-syn oil to begin with.
 
I got a case of Royal Purple from Amazon.com $30 cash rebate and free delivery. Can't beat that deal anywhere.:2thumbs:
 
Looking at the Mobil 1 Racing oil on the Mobil webpage they don't recommned it for street use.
http://www.modified.com/news/modp-0909-mobil-1-racing-oil/index.html

It has a high phosphorus content which - I think ( I am not an expert here)- can cause problems with O2 sensors and cat converters- item not found on race vehicles so it's not a problem there.

The anti wear properties of the additional phosphorus may help on the racetrack, maybe help on the street, but it is less likely to be needed on the street and the trade off may cause more problems than its worth.

I'd stick to the street formulas.
 
OIL

Looking at the Mobil 1 Racing oil on the Mobil webpage they don't recommned it for street use.
http://www.modified.com/news/modp-0909-mobil-1-racing-oil/index.html

It has a high phosphorus content which - I think ( I am not an expert here)- can cause problems with O2 sensors and cat converters- item not found on race vehicles so it's not a problem there.

The anti wear properties of the additional phosphorus may help on the racetrack, maybe help on the street, but it is less likely to be needed on the street and the trade off may cause more problems than its worth.

I'd stick to the street formulas.

The Phosphorus and Zinc are added for your transmission, that is in part what makes it a Motorcycle oil and not a car oil. JASO/MA is the ONLY certification for Motorcycle oil.nojoke


Michael:doorag:
 
Looking at the Mobil 1 Racing oil on the Mobil webpage they don't recommned it for street use.
http://www.modified.com/news/modp-0909-mobil-1-racing-oil/index.html

It has a high phosphorus content which - I think ( I am not an expert here)- can cause problems with O2 sensors and cat converters- item not found on race vehicles so it's not a problem there.

The anti wear properties of the additional phosphorus may help on the racetrack, maybe help on the street, but it is less likely to be needed on the street and the trade off may cause more problems than its worth.

I'd stick to the street formulas.

Interesting points---- but I for one don't have a Cat converter or 02 sensor anymore------ :D
 
OIL

Looking at the Mobil 1 Racing oil on the Mobil webpage they don't recommned it for street use.
http://www.modified.com/news/modp-0909-mobil-1-racing-oil/index.html

It has a high phosphorus content which - I think ( I am not an expert here)- can cause problems with O2 sensors and cat converters- item not found on race vehicles so it's not a problem there.

The anti wear properties of the additional phosphorus may help on the racetrack, maybe help on the street, but it is less likely to be needed on the street and the trade off may cause more problems than its worth.

I'd stick to the street formulas.

The link you furnished is for auto oil and not Motorcycle oil-:yikes:--There is a MAJOR difference in application. As I have previously stated--If it doesn,t state on the back of the oil container that it is certified as "JASO/MA then it isn't Motorcycle oil.:lecturef_smilie:
 
The link you furnished is for auto oil and not Motorcycle oil-:yikes:--There is a MAJOR difference in application. As I have previously stated--If it doesn,t state on the back of the oil container that it is certified as "JASO/MA then it isn't Motorcycle oil.:lecturef_smilie:
:agree:
 
I use the Mobil 1 4T Racing Oil in my 255 HP Sea Doo and its great.
After about 3 Thousand I,ll start using it in my NEW 09 SE5.
This will be my 14th Rotax engine and as long as the oil meets BRP,s ratings they have no problem with what oil you use as far as warranty.

Of course they want everyone to buy their oil??? LOL:hun:
 
OIL

I use the Mobil 1 4T Racing Oil in my 255 HP Sea Doo and its great.
After about 3 Thousand I,ll start using it in my NEW 09 SE5.
This will be my 14th Rotax engine and as long as the oil meets BRP,s ratings they have no problem with what oil you use as far as warranty.

Of course they want everyone to buy their oil??? LOL:hun:

Yes, the Mobil 1 4T Motorcycle Racing oil is what I use also, in the 10W40 weight. I have also used Amsoil Motorcycle oil but Mobil 1 is now sold at our local Walmart and can be picked up anytime at a good price.:thumbup:

Michael:doorag:
 
I goofed and forgot about motorcycle vs automobile oil.
The main problem for unit engines is possible clutch slippage when you put in an oil that is too "slippery" - great lubrication but doesn't allow the clutch to have enough friction.
I am surprised to hear that BRP is not selling a full synth oil and I will have to look around for one of the alternatives- so far it seems like there are a good number of folks who have been happy with the Mobil 1 motorcycle oil?

I am curious if anyone has put on an oil temp gauge and what oil temps the Spyders run in Summer.

https://www.mobiloil.com/USA-Englis...sphorous_Motorcycle_Catalytic_Converters.aspx her eis Mobils comments about the high phosphorus content- pretty much a non-issue it seems.
 
Last edited:
Oil

I goofed and forgot about motorcycle vs automobile oil.
The main problem for unit engines is possible clutch slippage when you put in an oil that is too "slippery" - great lubrication but doesn't allow the clutch to have enough friction.
I am surprised to hear that BRP is not selling a full synth oil and I will have to look around for one of the alternatives- so far it seems like there are a good number of folks who have been happy with the Mobil 1 motorcycle oil?

I am curious if anyone has put on an oil temp gauge and what oil temps the Spyders run in Summer.

https://www.mobiloil.com/USA-Englis...sphorous_Motorcycle_Catalytic_Converters.aspx her eis Mobils comments about the high phosphorus content- pretty much a non-issue it seems.

Don't know about the temperature; However, the Mobil 1 motorcycle 4T is a very good (pure synthetic) motorcycle oil. I know that there are other very good oils out there that will do just fine. It is not the brand that necessarily makes the difference but the Ratings; And there is only one rating for motorcycles. All pure synthetics (as advertised) are not all created equal either (I won't get into that) so I choose to use Mobil 1 Motorcycle oil because I know what it is and what it is not.:thumbup:


Michael:doorag:
 
Thank you for all the replies.I found the oil at Walmart for $8.50 a quart.That's half the price as BRP's oil.Along with the filters I got on EBAY, it cuts the price of my oil change in half.Now i have money to buy something else for Petunia(that's my bike not my wife).
 
Oil

Thank you for all the replies.I found the oil at Walmart for $8.50 a quart.That's half the price as BRP's oil.Along with the filters I got on EBAY, it cuts the price of my oil change in half.Now i have money to buy something else for Petunia(that's my bike not my wife).

:agree::2thumbs:
 
Back
Top