I did a search but didn't find....

[amelectricdavid]

David,.... Kudo's for you...:yes::yes::yes:...... nice idea on the frame for the body [emoji106][emoji106]....... What do you use for the surface material ????? ..... When I thought about doing something similar I was considering a product called CORFAM (?) ..It's a like corrugated cardboard ...but made from very thin plastic ...waterproof and very strong .... you can get large sheets and depending on which way the tubes are oriented, some fairly tight curves can be accomplished ...... DIY'ers ROCK .....:yes::yes::yes: Mike [emoji106]

I used 1/2 4ply for base...covered it all with water base driveway sealer...1/4 inch bc plywood for side 2 foot up ...3/4 electrical pvc for framing...covered that with corrugated plastic i bought 4 by 8 sheets from sign shop....use latex caulk and tech screws to hold it down....if u want to now more u will have to call

Sent from my LGLS675 using Tapatalk

 

[BLUEKNIGHT911]

CORROGATED PLASTIC

I used 1/2 4ply for base...covered it all with water base driveway sealer...1/4 inch bc plywood for side 2 foot up ...3/4 electrical pvc for framing...covered that with corrugated plastic i bought 4 by 8 sheets from sign shop....use latex caulk and tech screws to hold it down....if u want to now more u will have to call

Sent from my LGLS675 using Tapatalk

Those plastic sheets are ....." CORFAM " ......if you google it there are many varieties, thicknesses, etc. very very light but extremely strong ...... Mike :thumbup:

 

[amelectricdavid]

Those plastic sheets are ....." CORFAM " ......if you google it there are many varieties, thicknesses, etc. very very light but extremely strong ...... Mike [emoji106]

I used same stuff they make the yard signs out of...15.00 for a 4 by 8 sheet...used full sheet on roof...the last 4 ft of back is covered in frp board...liked the extra strength on the back around the door area

Sent from my LGLS675 using Tapatalk