• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Has anyone found a way to remove the start delay using the ECO button?

I use the kill switch to turn off the Spyder and leave the ignition on when filling up. No delay to get going again, plus I can reset the trip meter while it's filling!

That's useful to know. So turning off with the run switch then switching back on again allows you to just hit the starter? I'm going to try that out. Useful for small stops where I'm leaving the key in.
 
That's useful to know. So turning off with the run switch then switching back on again allows you to just hit the starter? I'm going to try that out. Useful for small stops where I'm leaving the key in.

You cannot do that on an F3, you need the key for the fuel tank. No need on an F3 either as there is no start delay.
 
You mean we don't have to read the card? :yikes: But - but - it says so on the screen! :lecturef_smilie:

Next, you'll be telling me I can remove the tags on cushions and mattresses! :sour:

Society is totally falling apart! :gaah: :roflblack:

If you remove that pillow tag I'm turning you in! Too whom is the question:roflblack::roflblack:
 
Inconsequential? whinging?

Hmmm

OK I'll bite...

Yes, the start delay is annoying and most of the time it's tolerable - just the way it is.

BUT sometimes it does cause a more-than-annoying problem - no quick get-aways are permitted it seems.

For example, when I'm in a gas station, the person waiting behind has had to wait while I remove helmet, fill up, go inside to pay, come back, put helmet & gloves back on (FYI the servo's won't let us fill up unless our helmet is off - "the law"), then off I go --- but wait --- not yet, let's just wait a bit longer while the car behind gets impatient & etc

For example 2, on a group ride where sometimes it's a sudden decision to ride on to the next destination - they've all taken off and I'm sitting there, unbeknownst to them just waiting for the spyder to tell me I've had time to read the safety card while it has a think about all its computer bits...

Lois,

There was a great tip on here recently. When you walk back to your Spyder, after paying for fuel, or after a ride break, turn it on. Then, by the time you have put your helmet and gloves on, the Spyder is ready for the "start" button. No added delays for cars waiting behind you, and you can take off with everyone else.

I was using that procedure until I found out I don't have to on the F3.:opps::)

Pete
 
I have mastered the start delay on the 2015 F3's

The procedure I followed was to put my left glove on, turn the key, have the start/stop button to on, press the ECO/mode button--take 2 sec to get my right gove on, then press the start button-- & no start unless I hold the ecO/mode button down until the dash flash ends. The real clue is from the time I hit the ECO/mode button I need to immediately hit the start button--in 1 sec or less. Waiting 2 seconds to put my right glove on kills the sequence...Key on, Start/stop button on,press ECO/mode button & immediately press the start button.
That's the info I've been searching....
Darrell
 
I have a 2016 F3 L SS and as soon as the display comes up all I do is hit the mode button and she starts right up without the wait...

Sent from my SM-N910T using Tapatalk
 
Start delay

On all spiders you do not have to wait to start after getting gas if it takes you less than 5 minutes!!!
 
RS-S quick stops.

When stopping for gas or photo opp, after turning the key off, I hold the mode button and the display remains on. This has been covered before on this board. So, when ready to start again, turn the key to on, start and the engine fires and the computer will reset the display. I love it. No waiting and I guess my BRP underware will be revoked for not reading the card.:yikes: I love life outside the box!
:riding:
 
Quick start

Turn on key, pull safety card out half way and push back in, press ECO/mode and foot brake at the same time hit start and you're on your way. Works every time. :thumbup:
 
I'm told that they are indeed looking to solve the issue.

The plan is to install sophisticated optical recognition technology that will monitor your eye and hand movements to confirm that you've actually read the card, and then you won't actually need to press the button!

They're thinking that it shouldn't add move than about $1500 to the cost of each Spyder.
 
As I mentioned in a post before, My buddy and I both have 2015 RTS's and all we need to do is turn key on, press ECO button and hit starting button..........starts. No delay. Mine will start before the dash display fires up. Maybe it was new feature starting with the 2015's? I've never even pulled the safety card out to see whats on it. How many have tried it? I read about it on a Canadian post before I bought mine. A tech at the dealership didn't even know you could start it that way....kind of scary. safe riding!
 
When stopping for gas or photo opp, after turning the key off, I hold the mode button and the display remains on. This has been covered before on this board. So, when ready to start again, turn the key to on, start and the engine fires and the computer will reset the display. I love it. No waiting and I guess my BRP underware will be revoked for not reading the card.:yikes: I love life outside the box!
:riding:


Where did you find the BRP underwear?
 
ECO/Mode switch

I was told - to wait the2 seconds for the main screen to come on -- because the computer was "re-booting". ????
 
Back
Top