I couldn’t find it in the manual, but did you guys know about the gas spill-off? I went to fill up where the pump didn’t stop. I notice that instead of the gas flowing out of the top, it all poured out of a clear tube on the bottom right front of the unit. Is this tube actually a gas spill off? Or did something break? Lol.
-
There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.
Gas spill off
- Thread starter numetheus
- Start date
Jsmith8695
Member
It is a gas spill off. It is in the manual someplace as I remember reading about only clicking the nozzle once when it stops or fuel will spill from the overflow tube.
-- jim
-- jim
BLUEKNIGHT911
Sadly Passed Oct 2024 - RIP
I hope you don't have the V-twin engine ….. if you do - a lot of gas has just contaminated the charcoal in the Evap. cannister ….Not a good thing ….. Mike
hyea:
Hypurone
Active member
A V-Twin in a ryker!? He must be a serious modder! ;-)
Markubis
Member
I think he meant the 2 cylinder 600 engine. It sounds like a V twin.
BLUEKNIGHT911
Sadly Passed Oct 2024 - RIP
No, I didn't mean the 600 ……………. Sorry but I don't check what the Forum is before hand :banghead:...…If the Asker can't take the time to include Their Spyder info …. I won't take the time to research it ………
hyea:Mike
jcthorne
Well-known member
I hope you don't have the V-twin engine ….. if you do - a lot of gas has just contaminated the charcoal in the Evap. cannister ….Not a good thing ….. Mike
And how would that have happened? Its been shown time and again that the 'overfill causing gas in the evap canister' is a myth perpetuated by dealers that do not want to deal with the real problem. You cannot over fill the tank and overflow into the evap canister. Liquid gas does not flow up hill.
BLUEKNIGHT911
Sadly Passed Oct 2024 - RIP
Correct it doesn't , however from Fiche's I seen it appears to these old eyes that the tubing exiting the gas tank goes into the EVAP cannister …… But I'm open to your theory …… If the GAS can't get into the EVAP cannister like you state …..Then exactly how does the cannister get contaminated was Gas ?????? ………..inquiring minds would like to know …… Thanks …. Mike
hyea:
jcthorne
Well-known member
Correct it doesn't , however from Fiche's I seen it appears to these old eyes that the tubing exiting the gas tank goes into the EVAP cannister …… But I'm open to your theory …… If the GAS can't get into the EVAP cannister like you state …..Then exactly how does the cannister get contaminated was Gas ?????? ………..inquiring minds would like to know …… Thanks …. Mike
Two parts answer. First is the fuel tank design is such that the fill port is below the vent port where the evap tubing connects. Leaves several inches of vapor space above max fill so the liquid can never reach the evap connection.
Second, the liquid fuel in the evap canister is real and does happen but its because the system is overwhelmed by boiling fuel causing significantly more vapors that it was designed for. The vapors condense in the tubing and canister to a liquid. In normal operation (without boiling fuel or significant off gassing) the few drops of liquid that condense are flashed off during the purge cycles and the vapors pulled into the intake. In the older vtwin bikes, the evap system is just overwhelmed with far more vapors than it can deal with. The liquids collect in the canister until its saturated. This was part of the findings for the NHTSA study that resulted in the 2013 RT recall but to some extent the design problem exists on all of the vtwin bikes.
Similar threads
