• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Garmin 595 Install on 2016 RT

I purchased a new Garmin 595LT, and would like to take advantage of the Spyder features.
I took the Right side panels off and found the power connection and what looks like an audio jack. Are these for the GPS?
The cable from the mount breaks out to several cables:
1. Black and Red (fused) wires.
2. A USB Port
3. Two round jacks, both labeled "Audio."
4. A smaller jack labeled "MIC IN."
Of course the Power wires need to be connected, I would think to the connector under the seat on the R side of the tank.
One of the audio connectors to the audio plug beside the tank??? If so, which one (does it matter?)?
Should the others be connected? If so, where?

Thanks,
 
I bought some AMP Superseal 1.5 connectors off of Ebay to hook up the power to the connector behind the tank. I didn't hook up anything else as I didn't need it. Getting the big harness connector through the steering head is tough, and pulling the right headlight makes the job easier. I have Tri Axis bars and the small hole may have made the job worse. Routing down the right side is important so as to not damage the wire. There are instructions here; https://instructions.brp.com/content/instruction-sheet/en_CA/e-instruction.html#tab=2
 
Back
Top