:agree:Same here Dave, didn't want to get you into a twist, you got enough on your plate as is. Was just sounding off, hope all straightens out for ya.Hey! Private is private. Enough said! You've had a rough time of late and the odd indiscretion is
entirely understandable so forget I asked, Dave.
Very happy you got out for some Spyder time with your boss. It's even good that the Red Sled is half naked
right now as you can see if all the work has been successful and when you get around to putting the covers
back on at least you'll be reasonably certain that everything in there is working well!
2nd, is that damn sqeeling pig being chased for dinner:cus: I'm referring to the brake pads squealing so bad, its embarrassing to ryde, or at least to stop. I had another local call me with the same exact issue with these EBC pads from Ron. Ron has NEVER had bad products, and I don't think these are bad, but maybe there just not set correctly or something, I'm not sure. I had sent Ron a PM about them a couple months back when I first noticed it, and he quickly responded with a few different things to try, but I was never capable enough to give it shot with my arm/hand issue. But now, I'm just dealing with the pain and going on, doing as much as I can and stopping when it gets too much, and having a drink every now and then seems to help a bit.
I am having the same problem with the pads from Ron which is disappointing since I really didn't need to replace my pads yet and only did it because they were supposed to solve the factory pad noise. Let me know if you get the problem solved. :banghead:
2nd, is that damn sqeeling pig being chased for dinner:cus: I'm referring to the brake pads squealing so bad, its embarrassing to ryde, or at least to stop. I had another local call me with the same exact issue with these EBC pads from Ron. Ron has NEVER had bad products, and I don't think these are bad, but maybe there just not set correctly or something, I'm not sure. I had sent Ron a PM about them a couple months back when I first noticed it, and he quickly responded with a few different things to try, but I was never capable enough to give it shot with my arm/hand issue. But now, I'm just dealing with the pain and going on, doing as much as I can and stopping when it gets too much, and having a drink every now and then seems to help :clap:
Hi Dave,Cooper is an 18 pound beagle/ pug mix. He is about 5 years old. We will be riding with him solo on the modded RSS ( hopefully an RT soon). We chose the pet palace in black to start. If he takes to riding we will have something custom built for him. Something a little wider so he can fully comfortably lay down.
We are focusing on short trip like to our local ice cream place, doggie daycare, training classes, or just short rides. Under 30 -45 minutes.
Cooper is crate trained and loves his crate. We have started teaching him to jump into the pet palace and rewarding him for sitting in it and staying. We then release him to let him know its ok to get out. Don't want him just jumping out of it on his own we want him to know he needs to wait for us to either lift him off or release him. We want him to see it as a good place. So far him seems to be good sitting in it, staying, and letting his head stick out the top. We also are working with doggles on walks - making him wear them so he gets used to. Any suggestions would be appreciatedView attachment 65909
I am having the same problem with the pads from Ron which is disappointing since I really didn't need to replace my pads yet and only did it because they were supposed to solve the factory pad noise. Let me know if you get the problem solved. :banghead:
Not sure if you saw this thread I posted earlier, like in Oct of 2011, but the entire thread is devoted to the How To's for Teddy's ryde'n set-up, complete with some totally amature vid clips & pics of what we use & what works for us. Positive reinforcement is ALWAYS your best motivator. Make sure to get a harness that is MADE FOR AUTOMOTIVE TRAVEL, a regular harness is NOT good enough & NEVER NEVER NEVER tether a dog using a collar around the neck. But making sure they are tethered is very important. Also, having a convenient water bowl is always good, as dogs can dehydrate rather quickly when exposed to the constant wind that comes with ryding. And even tho you have a carrier, a light colored (white/yellow???) or maybe even a mesh fabric type of shirt/sweater/jacket is always a good idea to prevent sun & wind burn. As I think of more, I'll post it.
http://www.spyderlovers.com/forums/...-the-SpYder-Ryde-n-Pooch-This-is-how-we-do-it
Thanks Dave & Teddy. We have bought a automotive harness for Cooper since he is connected to a doggy seat belt in the car as well. How did you go about getting Teddy used to the motor/ exhaust noise ? Cooper seems to be a little timid around it. thanks for all your help in advanceNicole, Jake, & Cooper
Dirty or damp (or humid) brakes are often noisy no matter what pad is installed. Same goes if the pins/sleeves are worn or inadequately lubed. "Frozen" calipers can do it, too. Pads that have become glazed through improper break-in or frequent soft use will also make noise. Clean them, use them to dry them, and use them hard from a decent speed every once in a while, and you will have less noise. If necessary, inspect them, remove the pads, check the pins and sleeves and lube the o-rings with disk brake lubricant, and sand the pads before cleaning them with brake parts cleaner. CRC Disc Brake Quiet works, but it should not be necessary with pads with a resilient backing like the Gen 3 pads. We now return yoiu to your regularly scheduled program. Sorry for the hijack, Dave.
Scotty, NEVER BE SORRY my man, you know I value your opinion and friendship greatly. To think, where we'd be today if not for all your sage advice and wisdom. I've told many, that I wish I knew just half as much as you've probably forgotten over the years when it comes to Spyders, less alone mechanics in general :bowdown:
I was in the garage with Teddy close to midnight last night , Spyder Repair Manual in hand and all the products that you & Ron have suggested, but I just couldn't get up the nerve to dive into something, that if I made a mistake, could potentially kill me, or even worse, Teddy.
I have little fear tearing into the unknown when it comes to things that are cosmetic in nature, body panels etc..... but when it comes to something that your very life depends on, call it fear or maybe even wisdom, but it just stops me in my tracks. I mean, I've never worked on brakes in my life, & was lucky when Pete showed up at our door when he did, and he did so much for us when my arm was all but useless. He's the one that readily tore into the brakes with no problem at all. There's just something to be said for that saying, "There's no substitute for experience." And even tho I watched him do them, and I have the instructions laid out in front of me, something just stops me.
Beagles Love Spyders ! :roflblack:Hi Dave,
Cooper is an 18 pound beagle/ pug mix. He is about 5 years old. We will be riding with him solo on the modded RSS ( hopefully an RT soon). We chose the pet palace in black to start. If he takes to riding we will have something custom built for him. Something a little wider so he can fully comfortably lay down.
We are focusing on short trip like to our local ice cream place, doggie daycare, training classes, or just short rides. Under 30 -45 minutes.
Cooper is crate trained and loves his crate. We have started teaching him to jump into the pet palace and rewarding him for sitting in it and staying. We then release him to let him know its ok to get out. Don't want him just jumping out of it on his own we want him to know he needs to wait for us to either lift him off or release him. We want him to see it as a good place. So far him seems to be good sitting in it, staying, and letting his head stick out the top. We also are working with doggles on walks - making him wear them so he gets used to.
Any suggestions would be appreciated
View attachment 65909