-
There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.
cruise control
- Thread starter bigpick
- Start date
safecracker
Active member
On all new Spyders, I believe all RT models and F3T and F3Ltd. F3, F3s and Daytona I am not sure. Bruce
Bfromla
Well-known member
Know it is NOT on the Rykers, Spyders yes every Limited model & most others. Other options to consider when shopping eco mode only on in ones with the 1330 (‘15&up)& trailer mode for the older 998
Haze
Well-known member
Most of the RS, ST, and RT Spyders have the Wiring and Sensor for the cruise control.
Only the mid and top level Spyders have the Right Side control module with the Cruise switch wired and functional.
Do a search for cruise control. Several riders have installed the needed switch as a DIY project.
Does not work on 2008 to 2012 GS/RS models.
See post #15. & #20.
https://www.spyderlovers.com/forums...rol-to-a-2015-RS-SE5&highlight=cruise+control
Printing the cruise control knob.
https://www.spyderlovers.com/forums...ontrol-Knob-3D-print&highlight=cruise+control
Only the mid and top level Spyders have the Right Side control module with the Cruise switch wired and functional.
Do a search for cruise control. Several riders have installed the needed switch as a DIY project.
Does not work on 2008 to 2012 GS/RS models.
See post #15. & #20.
https://www.spyderlovers.com/forums...rol-to-a-2015-RS-SE5&highlight=cruise+control
Printing the cruise control knob.
https://www.spyderlovers.com/forums...ontrol-Knob-3D-print&highlight=cruise+control
Alwaysonwheels
New member
Having just been shopping for the lower end of F3 Models they all do except the BASE F3 Does Not
SgtRay
New member
Yep, at least 2019 F3 s and up all have cruise control as standard.
According to Can Am's SPEC sheets, it appears that only the F3 (base) does not have cruise control. All other models do have cruise control.
LifeLongRider
New member
2019 F3 Ltd
And it works great, I might add :2thumbs:
And it works great, I might add :2thumbs:
CA Railwhale
New member
The module for the F3S can be added to the base F3. I'm planning to have it done in July or August since it will be too hot to ride then.
Similar threads
