Carchet Dual USB Power Port

[KJWEB]

I ordered the Carchet Dual USB Power Port and wire harness from JT. Installed the USB in the middle blank dash switch. It looks like it's made especially for the Spyder.

 

[Chupaca]

That it does...

nicely done, congrats...:2thumbs: JT has quality stuff for our roadsters.....:thumbup:

 

[james199]

That looks Great :2thumbs: . I been thinking of doing the same but didn't know how good it would look but now I'm doing it to :thumbup:

 

[rtotten]

Have two on order one for wife's RT and one for mine. Can't wait to get them.

 

[KJWEB]

One note, you do not have to take the glove box off. The hole under the blank switch is a 1/2" round hole. I was able to cut the hole with a dremel for the switch with the switch panel still on the bike.

 

[noboot]

One note, you do not have to take the glove box off. The hole under the blank switch is a 1/2" round hole. I was able to cut the hole with a dremel for the switch with the switch panel still on the bike.

Where did you get the power from for the switch, Direct to the battery ??

 

[KJWEB]

Where did you get the power from for the switch, Direct to the battery ??

If you order from JT, you can also order his wire harness for the USB port. It wires directly to the battery with a in-line 5 amp fuse

 

[EAGLE27]

If you order from JT, you can also order his wire harness for the USB port. It wires directly to the battery with a in-line 5 amp fuse

Sorry for my ignorance, but JT who??

 

[KJWEB]

Sorry for my ignorance, but JT who??

He is one of the forum sponsors. Look on the forum front page for his banner ad. JT's Machine Shop and Spyder Accessories

 

[chiptown]

I like the phone mount location. Did you buy the mount from JT also

Sent from my SM-N910T using Tapatalk

 

[KJWEB]

I like the phone mount location. Did you buy the mount from JT also

Sent from my SM-N910T using Tapatalk

That is Lamonster's Spyder cuff with the RAM X grip cradle

 

[chiptown]

Is there any info on how the wiring was installed. Is there any easy way to fish the wire down to the battery on fuse panel.

Sent from my SM-N910T using Tapatalk

 

[KJWEB]

Is there any info on how the wiring was installed. Is there any easy way to fish the wire down to the battery on fuse panel.

Sent from my SM-N910T using Tapatalk

I used a strand of 14 ga wire and fished it up from the battery in stages. Once you get the Tupperware off, you can see different areas to pull the wire up through the openings. It is somewhat difficult to explain or take pictures of how I did it.

 

[Larry rt]

I noticed light is on, does this drain battery if connected directly to battery?

 

[KJWEB]

I noticed light is on, does this drain battery if connected directly to battery?

No it doesn't drain the battery. There is very little amps drawn. Even before installing this, my bike is plugged in to a battery tender when parked in the man cave.