Breaking Panel Nuts

[Flamewinger]

When removing the panels I've found two clips where the spring broke and I'm wondering if I should buy a bunch to replace others when they break or is this a one off?

Or is there an alternative that doesn't break?

Thanks

 

[Chupaca]

Depends..!

always good to have on hand just a few they don't break that often depending on whos doing the work and what tools they use. If you remove the panel often then have some of the nylon washers that go on the torx scews as well. I use an electric screw driver with torque settings to avoid over tightening...:thumbup:

 

[PMK]

FWIW, you might also stock a few plastic rivets too.

Clipnuts, regardless of the application can fail, so few on hand may not be a bad thing.

PK

 

[SNOOPY]

I've had my panels off a dozen times for one reason or another. I try to get mods done in bunches so I just have to remove one time, but something else always comes up. Lol

So it's good to have spares because these small parts break down.

Ive broke 2 of those clips you show, probably more from not taking my time and making sure I have the right size bolt being threaded. :banghead:

 

[jthornton]

I've had 3 break so far so I keep a few on hand. They are about $1.50 each...

JT

 

[MikeinGA]

When removing the panels I've found two clips where the spring broke and I'm wondering if I should buy a bunch to replace others when they break or is this a one off?

Or is there an alternative that doesn't break?

Thanks

View attachment 87103

I replaced most of them with DZUS clips. They come off with a quarter turn. This is where I got mine: http://www.kurveygirl.com/shop/index.php?cPath=104_76

PM me if need more information.

Mike

 

[Flamewinger]

Thanks. I've got an order of bits n parts coming. The panel nuts along with washers and oil drain bolts.

It's quite a bit different than the Goldwing.


Susie - 2013 Spyder ST Limited
1983-2004 Goldwings. (5)
Sent from my iPhone using Tapatalk - now Free

 

[Silvervette05]

I have about 8 spares, just in case :thumbup: