• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Brake fluid leak rear? 2013 RS-S

Noiced this after a hot ride (about 90 deg. for an hour). Seems like brake fluid. Is this a normal overflow? Seems about a tablespoon or so. Wasn't hot or anything. Reservoir looked fine. Have not received a "brake failure" warning message (though I had one in the winter and added, ironically, a tablespoon). Reservoir is not topped-off under seat. Source seems to be coming from in front of the shock.

attachment.php
attachment.php
attachment.php
 

Attachments

  • IMG_20150629_165956.jpg
    IMG_20150629_165956.jpg
    38.3 KB · Views: 187
  • IMG_20150629_170006.jpg
    IMG_20150629_170006.jpg
    51.7 KB · Views: 181
  • IMG_20150629_170026.jpg
    IMG_20150629_170026.jpg
    68.4 KB · Views: 184
It's weeping out of the reservoir caps. Better clean it up real good because it will ruin the paint on the frame.

Sent from my SCH-I545 using Tapatalk
 
Here's the thing..!!

Recently had a similar problem. Seems the caps have a breather hole and need to be positioned to the high side. ( towards the back ) also the level is sensative and if overfilled will leak down the front of the resivoir and on down as you showed.
attachment.php
I now tuck a folded paper towel in the forward section to make sure it doesen't run down there...
 

Attachments

  • 20150526_131810.jpg
    20150526_131810.jpg
    39.9 KB · Views: 182
Ah! There was a bit of fluid there. That reservoir is quite pesky. The sensor indicates LOW and BRAKE FAILURE in the winter because of the fluid compressing ever-so-slightly! I'll re-position and try to find the hole. Easy. THANKS GUYS!
 
Quite a paint eating repeat error when they prep or work these, the rubber underside of the cap has a vent slit that needs to be rotated near the raised plastic bump on the top side. It can be aimed more aft than that bump on the top.
 
Hey Jim

Quite a paint eating repeat error when they prep or work these, the rubber underside of the cap has a vent slit that needs to be rotated near the raised plastic bump on the top side. It can be aimed more aft than that bump on the top.
Good to hear from you. Been a long time:clap:
 
Back
Top