Schnauzer
New member
RT A&C.. with the Limited Look
I installed new HID lights. While taking the headlight housing out, I found a vacant plug not being used. So I started digging, seems it's for the blue 5led's on the Limited. I removed the cover plate, found a stem located in the middle with 2 posts on each side. I drilled out the center post w/3/16 bit to run wire. Drilling a 1/32 hole in one of the side post I installed a 4led pod. The opposite post has a dimple which fit right in the hole of the led base, I applied Emblem adhesive to this side. Cost was $5.00 and 2 dabs of Black ATV silicone & Adhesive.. 1 1/2hrs of my time.Couple cigars, several cups coffee, and scratchin my noggin!. Instead of wiring them to the headlight, I chose to place them on the switched lights for accent. Don't want to give any excuse to pull over for running blue lights on the front. Sorry for the quality of pics




I installed new HID lights. While taking the headlight housing out, I found a vacant plug not being used. So I started digging, seems it's for the blue 5led's on the Limited. I removed the cover plate, found a stem located in the middle with 2 posts on each side. I drilled out the center post w/3/16 bit to run wire. Drilling a 1/32 hole in one of the side post I installed a 4led pod. The opposite post has a dimple which fit right in the hole of the led base, I applied Emblem adhesive to this side. Cost was $5.00 and 2 dabs of Black ATV silicone & Adhesive.. 1 1/2hrs of my time.Couple cigars, several cups coffee, and scratchin my noggin!. Instead of wiring them to the headlight, I chose to place them on the switched lights for accent. Don't want to give any excuse to pull over for running blue lights on the front. Sorry for the quality of pics




Last edited: