-
There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.
Anyone installed Mirror turn signals on their RT? '23 S2S
- Thread starter MCole
- Start date
eddieshep999
Active member
ThreeWheels
Active member
I have these on my RTL and like them alot; long horn turn signal lights for 2010 to 2019. "click: https://www.lamonstergarage.com/can-am-spyder-rt-longhorn-mirror-led-light-kit/
The OP Post was changed to show year & model of Spyder 2023 S2S.
Long Horn turn signal lights for 2020 + "click: https://www.lamonstergarage.com/lamonster-longhorn-led-mirror-lights-2020-rt-models-2019-f3-t-f3-ltd/
The OP Post was changed to show year & model of Spyder 2023 S2S.
Long Horn turn signal lights for 2020 + "click: https://www.lamonstergarage.com/lamonster-longhorn-led-mirror-lights-2020-rt-models-2019-f3-t-f3-ltd/
Last edited:
A few years ago I put some stick on arrow ones on our 2013 RT Limited. I either got them at Walmart or on Amazon. Inexpensive and easy to tie into the mirror lighting already there. I lighted them more for me to see if the directional stayed on or shut off! very visible from behind too. Did not take up to much viewing area either
ThreeWheels
Active member
These are mine from Lamonster.
I still don't know why the North American RTs don't have the mirror mounted turn signals, that are readily available elsewhere.
https://www.spyderlovers.com/forums...eveal-Review&p=1683310&viewfull=1#post1683310
Last edited:
RiderDuke
Member
I use this Fuse block. https://www.lamonstergarage.com/ele...-the-can-am-spyder-rt-2020-present-lamonster/
It was an easy addition to my bike...When adding stuff to the bike I prefer to isolate as much as possible... I'm not a fan of splicing into the bikes factory electrical wires.. I put it under my rear seat. I have a F3T and there is more room under the seat then there is on a RT
It says its for a 2020+RT but it also works on a F3T and F3L
eddieshep999
Active member
Similar threads
