Any compatible part #'s for this Ryker 12v Accessory Connector?

[RickD]

Does anyone have a compatible part number for the male 12v accessory connector (and compatible female connector) under the left headlight panel? I just need the connectors, not a harness. Thanks!

-

 

[WhiteCat]

As far as I know, there is no BRP part number for the compatible female connector (I also searched for it in the past but found nothing).

But I can tell you that the original manufacturer of these connectors is "JAE", and this special type is "MX19".

You can search the internet for a shop to buy the housing as well as the crimp-pins for it (like I did); or you can simply buy a ready to use extension cable, which is made for your purpose, like this:

https://www.slingmods.com/canam-ryker-12v-accessory-power-harness?vehicle=4

Regards
Michael

 

[RickD]

Thanks. I've learned that it is a JAE MX1900-series connector, available at Cycle Terminal.

 

[gbyoung2]

Know this was an "ancient" post, but many thanks to the both of you. I also just needed the "customer end" pieces (pins and housing), and probably have the crimping tool to handle that part of it, but decided to take the easy way out and just order the assembled harnesses from Slingmods.

I'll look and see if Cycle Terminal is still around and if so, will order some of the bits and add them to my collection.

EDIT: They are and will look for the specific items at a later date.

 

[StalkyTracker]

...

EDIT: They are and will look for the specific items at a later date.

I'll save you some time.

JAE MX1900

 

[djh3]

Joe at Cycle Terminal is great to work with. I have purchased parts from him for better than 10 years now. I have even sent him a picture of a part and he has been able to help me out.

 

[gbyoung2]

Much appreciated.

Thank you!

Guy