2013 STS left control blank

[Snakeeater]

Hey guys and gals, new to me, can’t locate information anywhere, looking for the name, part number or style of switch that is used in this location. I am installing a rear camera and a camera inside the trailer I’m using to carry a service dog. The monitor is being mounted below the shield and hope to use a toggle in place of this blank to switch power to cameras

Thanking all in advance

Cheers!

 

[TRBorslien]

That switch raises and lowers the windshield on my RT.

 

[Raprider]

On my 2016 ST-S, that is where the Parking Brake switch is located.
Unfortunately, I'm not seeing any of the handlebar switches on the parts diagrams, but you may have better luck (or vision) than me.
https://www.cheapcycleparts.com/oemparts/l/cam/51631018f870021a2486131f/2013-spyder-st-sts-se5-parts

 

[Bfromla]

On my 2016 ST-S, that is where the Parking Brake switch is located.
Unfortunately, I'm not seeing any of the handlebar switches on the parts diagrams, but you may have better luck (or vision) than me.
https://www.cheapcycleparts.com/oemparts/l/cam/51631018f870021a2486131f/2013-spyder-st-sts-se5-parts

:thumbup: will have to investigate replacing my 13 controls with 16:thumbup:
on the '13s left blank & was told can't add switch there because of circuit lay-out in the controls on that side. There may be a way, just probably gonna be tight.

 

[CADRE]

2012 Spyder RTS. SE5. my Switch to raise/lower windshield is in that spot...

 

[Flamewinger]

The switch cluster is the same on all bikes and the RT's have more features than the ST. I used that spot for a PTT button for the Sena SR10 Cb adapter.