-
There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.
12V CONTINUOUS POWER WIRE
- Thread starter WIDOWSSON
- Start date
Really????
:yikes::yikes::yikes:This is the F3 Forum and there is only one year model out! :joke::joke::joke::joke::joke:
But to answer your question. 2015 BRP Can Am Spyder F3S SE6. Color: Pure Magnesium Metallic.
I want the power to go the Admore Lights to Givi Side Cases.
But this is the F3 Forum right?
:yikes::yikes::yikes:This is the F3 Forum and there is only one year model out! :joke::joke::joke::joke::joke:
But to answer your question. 2015 BRP Can Am Spyder F3S SE6. Color: Pure Magnesium Metallic.
I want the power to go the Admore Lights to Givi Side Cases.
But this is the F3 Forum right?
THANKS TAZZEL
I KNEW WHERE I WAS AND THE AUDIENCE I WAS TRYING TO CAPTURE. :clap::clap::clap::clap::clap:
I KNEW WHERE I WAS AND THE AUDIENCE I WAS TRYING TO CAPTURE. :clap::clap::clap::clap::clap:
Mikind7
New member
Those are only powered when the engine is running.
Deer Slayer
New member
RTFM, right Larry. Most never look in the little white book.:roflblack:Ok,ok I was looking at the latest posts on left , before you go to forums. Sorry! Hope someone can help , I don't know that much about F3pps:
jcasey
New member
Isn't there a way to move the fuse and make it unswitched?
Deer Slayer
New member
There is on my RS , but not sure on the f3. It would be the owners manual.
jcthorne
Well-known member
No, not on the F3. There are no readily available circuits that stay powered when the key is removed on the F3. You would have to add a fuse block and come from the battery.
Is all this really necessary for some lights on a side bag?
Be a bit more specific about what circuit you are trying to power and perhaps others here can help. Likely going to need to use the power connection under the passenger seat.
THIS BLUE WIRE
I'm just trying to follow the directions which states that this "blue" wire has to be connected to a 12v continuous power source.. Others here said that they connected this "blue" wire to the grey wire with the red or brown stripes. The problem i encounter when doing that is when I turn on the right blinker, the left side blinks also. I contacted Admore and they want me to send the mini controller back. Could be faulty.
I'm just trying to follow the directions which states that this "blue" wire has to be connected to a 12v continuous power source.. Others here said that they connected this "blue" wire to the grey wire with the red or brown stripes. The problem i encounter when doing that is when I turn on the right blinker, the left side blinks also. I contacted Admore and they want me to send the mini controller back. Could be faulty.
JUST JOKING AROUND
NO HARM INTENDED.
NO HARM INTENDED.
Ok,ok I was looking at the latest posts on left , before you go to forums. Sorry! Hope someone can help , I don't know that much about F3
THANKS
I already packaged the mini controller with wires to be sent back to Admore. I will post when i get the replacement controller. Thanks for inquiriing.
I already packaged the mini controller with wires to be sent back to Admore. I will post when i get the replacement controller. Thanks for inquiriing.
Similar threads
