• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Search results

  1. Spyderjuice

    Need to stiffen the front Shocks a bit.

    pm ulflyer. He posted about some rubber spacers that stiffened the springs on his 2014 RT. He had pictures, etc. I think it was $20 or so, but can't find the post now either.
  2. Spyderjuice

    First post in the new Spyder F3 board

    Those pegs look like they might be adjustable by sliding back and forth on the frame bar. That would be neat.
  3. Spyderjuice

    Nets for Saddlebags and Trunk

    Site sponsor "tricled" also has them. Stan
  4. Spyderjuice

    Cognac under wraps

    I like it. Looks nice. :2thumbs: I have a white one I'm trying to decide on what to do. Stan
  5. Spyderjuice

    You know you had a good "spirited" ride the day before...

    "When your shoulders are sore the next day. :dontknow: Got to know the nanny a bit better yesterday and today." and I thought it was because I was just getting older.... Stan
  6. Spyderjuice

    ER Visit Last Night

    I don't see what spyder you have. The 2013 RT's had ball joint problems when they first came out - they were too tight and had to be replaced. It caused similar problems to what you describe. But again I don't see what you have. Stan
  7. Spyderjuice

    Lazier Alignment

    It doesn't take but 30-45 minutes to do a lazer alignment unless your bike is way out of alignment and the belt needs adjusting as well. Lamonster charges $120 to do it and if your bike is not out of alignment he doesn't charge anything. My dealer here is NC charges $127.50 to do it. Find...
  8. Spyderjuice

    2014 RT Limited Start Up Noise?

    I have noticed more noise when you first crank the motor and then it gets quieter after a short warm up. However, I find the 1330 engine noisy in general. I couldn't tell you if the muffler is there or not (I know if there was no muffler it would be loud). All I hear is engine noise riding...
  9. Spyderjuice

    Winston-Salem Honda/Can Am Dealer doing Lazer Alignments

    I just had mine done by Lamont and all is great. Tracks much better and a lot of vibration is gone. The handlebars must be re-set on the buds computer to center them. Did they hook up to buds? Doesn't sound like they did. The handle bars need to be positioned at center and then set at...
  10. Spyderjuice

    Laser Alignment question

    I asked the same question of Lamont. His answer was the laser alignment is done on the hubs, not the tires. So go for it... Stan
  11. Spyderjuice

    So who is in line for a 2014 RT

    The dealer wont have his shipment of new :spyder2:'s until March or so. That's the way it is here because of the long winters. I am leaning towards the Silver/w Burgandy seat LTD with all the chrome. No reason to sign off now because I would not even have it in my garage to polish and drool on...
  12. Spyderjuice

    DPS Upgrade? Replacement?

    I have an 08 spyder and the DPS was changed out in a couple of hours while I waited. It was done during the recall campaign however. They have to take the front trunk off to get to it. Have them grease the front while they can get to all the zerks easily. Stan
  13. Spyderjuice

    First test ride on the new 2014 RT-S 1330 and I didn't like it!

    I think if you go back to Len's video, you'll find that he was riding a manual shift and not semi-auto. Stan
  14. Spyderjuice

    2014 Models

    My dealer says they would get the new units in January - maybe December but doesn't think so. Stan
  15. Spyderjuice

    Need suggestions as to where to mount the antenna for xm radio on a GS

    XF antenna I have a Chad windshield and it has a metal plate up front that the windshield attaches to. I put my antenna on that metal plate (magnetic mount). It is out of sight and almost invisible. The windshield is tinted so you really can't see it there. I wanted a location so it wasn't...
  16. Spyderjuice

    Sway Bar Heim Joint Link - Custom Replacement

    Email sent. Stan
  17. Spyderjuice

    license light red cover

    Try contacting No Magic Neon or Custom Dynamics. Both are site sponsors and can be accessed from the home page. I bought the cover that makes the light a running light as well as license plate lite. It is a complete swap for the OEM light. I think I paid $20.00 a year or so ago. Stan
  18. Spyderjuice

    Thanks Lamont!

    Thanks Lamont and Chris I enjoyed my time! The BBQ was great. Thanks for allowing us all to be there. I find the Spyder family to be a friendly group!! Thanks Lamont and Chris!! Stan
  19. Spyderjuice

    Fuel sending unit or fuel pump or ...

    Update...Thanks again to those who replied. Roger I was impressed with your drawing and the time you took to do that - thanks. I tried the seafoam suggested by Mike and that seems to have worked. The gauge seems to be working after one tank with seafoam added to the gas. I'm working on the...
  20. Spyderjuice

    Fuel sending unit or fuel pump or ...

    Fuel pump or sending unit Thanks for all the help and suggestions. Instead of using a stick I think I'll just keep up with the mileage. I may fix this by trading... I do appreciate all the suggestions and help. I knew you guys would come through. Stan
Back
Top