• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Search results

  1. SpyderJerry

    Got a Spare key for early Spyders!

    Anybody looking to get a spare key for their 2008 to 2013, google a ZD23RT5 key. It was not available for a while, but just got 2 blanks from ekeyblanks.com and had Ace hardware cut and clone a spare key. This one cost me $20.00 for key blank and $4.00 to get it cut. They did not charge for cloning.
  2. SpyderJerry

    How the heck do you get to the VCM bleeder port on 09 GS?

    If you put the bike on jack stands or other, you can remove the bottom left belly cover to reach it
  3. SpyderJerry

    Cone size for a front tire balance

    I have been using the Harbor Freight bublle balancer with no problems. https://www.harborfreight.com/search?q=tire%20balancer I use stick on weights.
  4. SpyderJerry

    2021 RT Trip re set - how can I do this??

    Push your mode button until trip meter screen shows. Push and hold bottom button to zero. Push side arrow buttons to change from a and b trip meters.
  5. SpyderJerry

    Steering DPS issues - stiffens up at speed! Help?!

    Also, make sure you check your battery connections. Grab the cables at the battery, if you can move either, clean and retighten the connections. Had the same happen on my 2013 with the same symptoms. Also, helps to put star washers on bolts
  6. SpyderJerry

    Rear Cargo panniers/saddlebags won't stay locked?? Anyone else? 2020 F3T

    On my rt which uses the same type of latch. I found that the return spring at the latch was on the wrong side of the release lever at the latch. had to remove latch and reinstalled spring on the cable side of latch. It would latch and then open going down the road.
  7. SpyderJerry

    Where is the VIN Frame Stamp Location (not sticker) on 2020 F3-S?

    Both 2013 RT SE5 ( that I rebuilt and replaced frames) did not have serial numbers stamped in the frame. This was also verified by dealer and BRP. The Serial is on the swing arm, left side. then there are paper tags behing the frunk and one on top of the frame under the rear luggage pack. You...
  8. SpyderJerry

    Here's why all the Back orders!

    If it bent the wheel back, chances are the frame may also be damaged. Look closely at a arm mounting areas.
  9. SpyderJerry

    SE6 Shifting on its own and not down shifting at all

    If your shift lever feels like it does not return fully to center, you may have the same problem that I had. https://www.spyderlovers.com/forums/showthread.php?139591-Shifter-lever-fix&highlight=shifter+repair
  10. SpyderJerry

    Limp Mode & Fault Codes on 2013 RT-s SE5 that won't start - HELP!

    When you reinstall the front trunk and hook up the ambiant air sensor wire, the air codes will go away. Next try this on the brake, Turn the key on and wait until it fully boots up. Press down hard on the brake pedal and hold it. Turn the key off and wait until it completely shuts down. Wait 30...
  11. SpyderJerry

    My Shifter lever fix

    I just had a pecular problem with my 2013 RT SE5. It would not upshift. I found after playing with it a bit that I had to center the lever after each shift. I took the control loose from the handle bar and saw that the spring loaded ball that returns the shifter to center was stuck down. The...
  12. SpyderJerry

    Anyone know how to disconnect this plug?

    I use RTV adhesive on screws like that.
  13. SpyderJerry

    Parking brake / will not shift 2014 RTL

    Seperate systems. First thing to look at is the shift arm under left side to see if it fell off.
  14. SpyderJerry

    998cc Radiator - solder or weld a patch in place of the bung (broken)?

    There are some on ebay for sale or try Pinwall cycles parts for used one.
  15. SpyderJerry

    Where is Oil pressure sensor please

    Oil pressure switch is on the right side of engine, bottom side on clutch housing. Close to the bottom radiator hose elbow.
  16. SpyderJerry

    What does P0073 Fault Code mean?

    With the frunk off, you did not have the ambient air sendsor conected. With it recconnected, it will run properly.
  17. SpyderJerry

    R&R regulator/rectifier and Stator

    Here is a reputable company to have your stator rewound. Have used him for some years. Does not look like he has units built in stock. But you can check with him at this site. But do make sure you test the stator firs, very good procedure in manual...
  18. SpyderJerry

    Need help with BRP Connect

    Did you check your voltage to see that you are about 12 volts static. Also, check battery connections, by putting a wrench on them to make sure they are tight.
  19. SpyderJerry

    Bleeding/flushing brake fluid.

    This is from the service manual: As Jaybros said you do not need buds to finish job. A little will be left in the system. DO NOT TURN ON KEY DURING THE BLEEDING PROCESS. To avoid serious damage to the brake system: – Use only DOT 4 brake fluid from a sealed container. – Use only a clean funnel...
Back
Top