New Brake Pedal

[SFC]

Thank you all

I knew I would get a fast answer on SL. THANKS AGAIN

 

[alpacaguy]

I installed one because on more than one occasion my foot became hung up on the lip where the casting meets the black side panel. I almost rear ended a car because of this. The wider pedal allows me to move my foot away from that just enough and now no more hang ups.

Just one more reason BRP should install a hand brake like the two wheelers...

 

[OldCowboy]

Its a 10mm. Mine was wonderful on my previous '11 but not on the '14 with floorboards. I've tried it twice and taken it off each time.

I would think this pedal would be dangerous with floorboards, especially the BRP breakaway boards. I'm wondering if it would hang up on the top of the breakaway board before it was able to engage the breakaway feature. On the aftermarket boards, there is a cutout which will let you depress the OEM pedal until it is flush with the board. The extended pedal would be stopped an inch or so sooner.

 

[Cruzr Joe]

I would think this pedal would be dangerous with floorboards, especially the BRP breakaway boards. I'm wondering if it would hang up on the top of the breakaway board before it was able to engage the breakaway feature. On the aftermarket boards, there is a cutout which will let you depress the OEM pedal until it is flush with the board. The extended pedal would be stopped an inch or so sooner.

It works fine with the break away floorboards, no problem

Cruzr Joe

 

[Bob Denman]

Thanks, Joe! :thumbup:
I was just gonna throw you under the bus, and tell everybody that you had tested this scenario!

 

[ulflyer]

Thanks, Joe! :thumbup:
I was just gonna throw you under the bus, and tell everybody that you had tested this scenario!

My dislike of it is because it takes up the space where I want to put my foot. I'll bring mine to SF, Mo to sell.

 

[Bob Denman]

Rather than have to carry it around; why not just see if you can find a taker, from right in here for it? :thumbup:

 

[ulflyer]

Rather than have to carry it around; why not just see if you can find a taker, from right in here for it? :thumbup:

Mainly because its not worth the trouble to box it, 10 mi to PO, postage of $5-6. Might give it to a guy I know whose ailing and can't ride much now in hopes it'll cheer him up.

 

[FiFi]

Has anyone tried the pedal with webboards? Thinking about getting one for the wife.

 

[Bob Denman]

Mainly because its not worth the trouble to box it, 10 mi to PO, postage of $5-6. Might give it to a guy I know whose ailing and can't ride much now in hopes it'll cheer him up.

Now THAT's a real nice thing to do! :clap: :2thumbs:
I hope that he knows what a true friend you are! nojoke

 

[Magdave]

They work great with my Seal floorboards.