shakin_jake
Member
Not sure what happened Mike. When I posted the reply both pics were there. Me thinks the site software could be at fault but, I could be wrong
Best,
Jake
Reddick Fla.
It’s never too late to have a happy childhood
-
There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.
What can I do to get a straight shot at the Rear Tire valve Stem?
- Thread starter Fire34
- Start date
Best,
Jake
Reddick Fla.
It’s never too late to have a happy childhood
Not the software Jake, it was an operator error! You need to attach pictures to your post first, using the 'Attach Files' button that appears below the text field when you enter a new post; after which a small version of the image will appear below the text box. But then, instead of just submitting the post (which looks like what you did) you've gotta finish the job (which looks like you didn't do!); cos before you submit the post, you NEED TO INSERT the file/s you just attached into the post - you do that by firstly by positioning your cursor/pointer wherever you want them to appear; then come back to the attached file and click on the word 'Insert' in the top LH corner of that small image; and that will then let you click on 'Thumbnail' so that the image will appear as a thumbnail in your post. See the Sticky linked below about this:
If you do that, ie. Insert any images/attachments/pics into your post, then not only will it mean you don't lose the image if your link is disturbed or lost (think photobucket!) but also everyone will stand some chance of being able to see them, even if they are viewing the Forum on a small screen device.
LongIsland
Member
I was thinking about my post last night and realized that you can't simply flip the tire so the valve is on the right. I was thinking how rotating tires on a car flips the valve from right to left and the light bulb went off. Can't do it on a rear motorcycle tire. Mea Culpa!
BajaRon
Well-known member
I don't know of any wheel that your can 'flip' or mount the opposite way, front or rear. Maybe a wheelbarrow or lawn mower. But not something with lug nuts.
This doesn’t really answer your question but once I found the best location to access the valve stem by rotating the tire, I placed a white dot on the wheel/sprocket as a marker where the valve stem is. This doesn’t solve the tire inflation issue but makes it easier and quicker to align your tire so its in the best position to do the task.
Poasttown 2019 F3L
Poasttown 2019 F3L
bikerbillone
Well-known member
BRP reuses to fix an 'aggravation', but we all love our Spyders, right?
BajaRon
Well-known member
Well, that is an interesting angle. There has to be some reason that the corporate mind has which prevents them from such a simple fix. And in this insane world, an insane explanation may actually be quite logical.
Well done! I think you could be right!
JayBros
Well-known member
Pulled the bride's car into the garage this a.m. returning from breakfast out with her, and I noticed the valve stem on the Spyder was exactly at 6:00 and a straight shot for the Harley valve extender, PN 42300009. While I have an electric compressor, I always use an old JoeBlow floor bicycle pump, a few strokes from which are more than adequate to top up all three wheels. The Accu-Gage reads to 60 lb. which is more than adequate and the right angle chuck and bleed valve button make it a breeze, pun intended, to get the rear General Altimax exactly where I want it.
- 
- 
MiniNona
New member
Just got almost the exact same thing @ harbor freight!! Works great
works on the hubs Triumph 
too.Trying to figure out the best way to get to the rear tire valve stem, I bought a floor jack that is low enough to slide under the Spyder, but despite some advice as to where to place the jack, the rear end is low enough to the ground that I could not see where to put even when lying flat on the ground next to the bike. I plan on stopping by the CanAm dealer once the weather is nice enough to go for a ride, and ask them to show me where the best spot would be to place the jack.
In the meantime, I found what works for me. I left the parking brake off, laid down next to the bike on the left side, and while lying down pushed the bike (not hard even at over 1,000 pounds) until the valve stem was at the bottom of the wheel (six oclock). Then I attached an extension to the valve stem, which then made it easy to hook to my electric air pump. Once it was pumped up, I screwed the FOBO2 TPMS piece onto the extension for an easy read of the tire pressure. Once I had it to where I wanted (30 psi, which meant I had to bleed a bit of air out even though I had set the air pump at 30), I removed the extension and screwed the FOBO2 sensor back on. This process meant that I only had to lay down on the ground once for the entire thing, and at my age, not having to get up off the ground more than once made the whole job a lot more tolerable.
With a brand new rear tire on the bike, and with the psi at 30, I hope to go an entire riding season with only using the TPMS to monitor the air pressure in the rear tire. As long as it does not get down below about 25 I will be fine so even with some leakage over time I should be ok. Front tires are, of course, no problem even for an old codger like me with a bad back, damaged shoulders, and artificial knees.
In the meantime, I found what works for me. I left the parking brake off, laid down next to the bike on the left side, and while lying down pushed the bike (not hard even at over 1,000 pounds) until the valve stem was at the bottom of the wheel (six oclock). Then I attached an extension to the valve stem, which then made it easy to hook to my electric air pump. Once it was pumped up, I screwed the FOBO2 TPMS piece onto the extension for an easy read of the tire pressure. Once I had it to where I wanted (30 psi, which meant I had to bleed a bit of air out even though I had set the air pump at 30), I removed the extension and screwed the FOBO2 sensor back on. This process meant that I only had to lay down on the ground once for the entire thing, and at my age, not having to get up off the ground more than once made the whole job a lot more tolerable.
With a brand new rear tire on the bike, and with the psi at 30, I hope to go an entire riding season with only using the TPMS to monitor the air pressure in the rear tire. As long as it does not get down below about 25 I will be fine so even with some leakage over time I should be ok. Front tires are, of course, no problem even for an old codger like me with a bad back, damaged shoulders, and artificial knees.
"The Accu-Gage reads to 60 lb. which is more than adequate and the right angle chuck and bleed valve button make it a breeze, pun intended, to get the rear General Altimax exactly where I want it."
I bought the gauge and the valve extension (but not the Harley one) and used it to make the job much easier. It still requires me to lay on the ground, but if I can limit this to one or at most two times a riding season, I can live with it.
I bought the gauge and the valve extension (but not the Harley one) and used it to make the job much easier. It still requires me to lay on the ground, but if I can limit this to one or at most two times a riding season, I can live with it.
Similar threads
- Locked
