Hi All, This is my 1st post here. I'm not new to riding and over the years, I've ridden with quite a few people who love their Spyders. I also test rode one years ago, I kept putting my feet down! LOL!
I'm seriously considering moving to 3 wheels myself. I've read a bunch of threads comparing SE vs SM. Personally I still love to shift so I'd prefer a SM bagger / RT myself. Two general questions, hoping to get some feedback from those who know better.
1) It looks like the SM option is gone for 2021 which for me would rule out purchasing new. Is this the case?
2) Assuming a used unit, how significant is the difference between the 2 cylinder SM-5 vs the 3 cylinder SM-6? In terms of HP, performance and gear ratios?
Thanks in advance!
--Lou
Lou, BajaRon is right - you will get a lot of opinions.
As for the SM5 vs SM6, I cannot speak to a comparison of the two. However, it would not surprise me if they are the exact same transmission +1 forward gear. Others may be able to confirm/deny that. By the way, all Spyders have reverse, regardless of SE or SM.
I have a 2015 SM5 and I will contribute that it may be the smoothest shifting manual transmission on a motorcycle I have ever experienced. The clutch has a light pull and linear engagement. If you go with the SM5/6, know that operating that transmission will be a positive experience.
I have never ridden an SE-equipped Spyder, but there is pretty much only positive commentary on it. A few folks stick with the SM transmission for its simplicity.
There is a difference between an SE5 and an SE6. The SE5 is hydraulically actuated, while the SE6 is not. The SE5 in combination with the twin motor needs to be operated at higher rpms to reduce wear. Others may contribute more on that topic.
As for the engines - I own the 998 V-twin in my 2015. Not knowing what two-wheeler you are coming off, the twin can feel familiar or foreign. It loves to be revved and actually is smoother at 6000 rpm than it is at 2000 rpm, under load. If you are coming from a European twin, or a lower cc Japanese bike, its power band should not surprise you. Coming from an American, big displacement V-twin? Big adjustment. I was running VStar twins and a couple of Gold Wings prior to acquiring the V-twin Spyder. It took me awhile to be comfortable with shifting at 5000 rpm regularly. Now, I love it, and I find myself revving it out to 6000-8000 a few times every ride because of how sweet it is, and how hard it pulls at those engine speeds! The twin will purr at 4500 rpm around 60 mph, in either SM or SE versions. Most Harleys are running 2000-2500 at 60, so that can be a bit of shock for those folks. It is fairly quiet while cruising, in my opinion. It is no louder than my GW at 60-70 mph, but the sound is different. It is the sound of a higher-revving motor vs the GW's steady, low exhaust-driven roar.
I think most that have owned one of the twins will agree that it is a spunky motor and makes the Spyder experience a bit more lively than the 1330, particularly in aggressive riding.
The twin's maintenance schedule is more intense than the triple's. Oil changes every 4300 miles vs 9000 miles on the triples. Some twins burn oil - mine does not, no matter how hard I beat on it. It was pretty fine tuned by the 2015 and 2016 model years, smoother with more low-end torque. Power is 100 horsepower, 80 lb/ft torque. The triples are 115 hp, 96 lb/ft of torque.
The twin was last used in 2016 STS and RSS models. You could get a twin in the 2010-2013 RT models; they went to the 1330 from 2014-present. The F-series Spyders have always used the triples (originated in 2015, I believe). BRP reduced the model lineup in 2016, leaving only the F3s and RTs.
Others will have to comment on the 1330. It's power band is much different. I believe they cruise at 3000 rpm around 60 mph, and make more low end torque, so shifting at 3500 rpm nets normal acceleration vs 5000 on the twin.