• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

3 Bag Ryker & Passenger Spot

Very impressive, Thanks for sharing, I'm sure that it will give many more folks ideas on how to fit for theirs Rykers.
 
Ryker 4.jpg OK if I miss anything I am sorry. The plate you see you will have to get fabricated to what style bags you want. Ryker 3.jpg These bag and rear top case mounts are GIVI for a 2013 NC700X Honda. The passenger spot plate will be made to fit the angle of the bag you want. The plate is set on and bolted to the Max mount. I also purchased the passenger seat to get the (P4 cross member) and the (P2 & P3 passenger foot rest) P4 for more strength on the max mount. I will use the passenger foot rest in the down position when the bags are on and loaded. For the VSS calibration. Any bag can be used to your liking. Left bag must be set up or out to clear the drive shaft housing. I went more up then out.Ryker 6.jpg These mount fit the Givi Trekker Outback. 37L side 42L top case. If I missed any thing you can PM me. Glad to help. Going to Rolla Missouri Sunday to visit M2 Shocks now I have my stock shock on 5. He will be building Shocks for the 900ace. I have enough room on my Ryker for a week trip. Clothes, Cold weather, Wet weather, Some tools, a small ice chest and a small fan strapped on passenger spot for motel noise.
 
Would it work to have top box in line with side cases so one could put a back pad on top box for back support? :chat: cueman
 
IdahoMtnSpyder said:
Is that because you already had them or you determined they were the easiest to adapt to the Ryker?
Click to expand...
Already had the mounts, very easy to adapt to the ryker max mount. But most of all I like these bag and they don't stick way out have a lot of room (had to buy). The mounts for the NC700X are very easy to work with.
 
Someone who has the ability to make Kid Ryker's design in quantity should set up production and of course give a cut of the action to Bro Kid Ryker.

Or better yet...........K R , set up production your self.......... :thumbup:
 
old Timer said:
Someone who has the ability to make Kid Ryker's design in quantity should set up production and of course give a cut of the action to Bro Kid Ryker.

Or better yet...........K R , set up production your self.......... :thumbup:
Click to expand...
GIVI could do it
 
Looks like nice fabrication.
I would be a bit concerned with having the weight so high and far to the rear. If you carry a passenger it changes the calibration of the VSS, have you engaged that switch?
 
You must log in or register to reply here.

Similar threads

AndysF3S
Canyon Redrock vs '22 F3S - Demo day ride/comparison
Replies
5
Views
1K
troop
troop
C
My F3S Bags - Function over Form
Replies
4
Views
1K
F650624
F650624
Valkrocket
My in-depth Comparison of 2018 RTL Chrome vs. 2021 RTL Chrome. (Long Read)
Replies
18
Views
4K
Valkrocket
Valkrocket
I
Can Am Ryker 900 Hard Fact’s - Mike Mas
2 3
Replies
42
Views
45K
chris56
chris56
ARtraveler
A New Trend is Happening
Replies
15
Views
6K
pegasus1300
pegasus1300
Back
Top