• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Looking for BRP Connect expert

Good Morning Bigmo.
You’re almost there! All you need to do now is open Genius Maps from your phone (while NOT connected to Spyder). Using your phone, open Genius Maps, go to settings and make sure you set everything properly. I’ll try to figure out how to attach a pic to this thread but in the meantime, make sure the following:
Settings Tab:
Pro Guidance: North America
Voice: (choose any voice u like)
Vehicle Connectivity: NorthAmerica
Language: English/UK
You Can also go to Route Settings, click off what u want.
When done going through settings, click that Heart, go back to screen that shows map.
‘Close the app on your phone (but not a hard close)
connect phone to Spyder in Frunk.
‘Start her up, wait for everything to load. Now u should be able to use the steps In my first post on this subject.
‘Get your music playing, hold down joystick, scroll over to Genius Maps and launch.
I wrote a lot of words, but this process will take u about 5 min. I’ll try to take a pic of the screen and post here or PM you.
Good luck, pls let me know if this helps.
Jarred.

Jarred, thanks for the info. Well, I got it to work but not with the phone I wanted to. I have 2 phones, both Android. The Samsung Note 4 has V.6.0 but no cell data (disconnected) and my current phone with cell data LG Stylo 3 with V.7.0. I got all to work fine with the LG. The Samsung, which I don't use for calls, is the one I wanted to keep connected. I'm not sure if the version 6.0 vs 7.0 makes the difference. (I'm not sure if I can get the 7.0 version without a cell service). I have all the setting you list above on both phone. BTW, I extended the USB port in the Frunk to right behind the windscreen, so I can see the phone while doing all this. The phone, Samsung, doesn't shut off, just shows the outline of a phone with a cord attached. That alone tells me that it is connected properly. Anyway, I guess I'll use the LG since I'll have it in front of me. Wonder if a call comes in (not that I will try to answer) would the phone shows incoming call? I'll have to try that and have my wife call me while on BRP Connect. Anyway, thanks a lot for your help. I'll let you know about incoming calls.
 
Loading ......

I have a new 2018 F3 bought last month. I have a simular problem mine will say loading and will freeze there no music either from phone or fm won't allow you to change display like it's locked up. Have appt for dealer to check BUDS for issues. The only way to fix temp is to shut off bike and let all lights go off and then restart and sometimes this doesn't help.
 
Good morning Gerard.

Her’s the “fix” for No Track screen.
‘If your driving and try to play music and u get that message. Keep that screen up, pull over (or wait to stop at Stop sign/traffic light)
When your Spyder is stoped, the “No Track’ screen will change to your music screen (Playlists/Artists etc). Select your music, start driving.
No need to disconnect phone etc. Spyder just needs to be stopped (or maybe drive very slow, I’ll try that later) for the No Track screen to turn into your music screen.
This method has worked for me 3 out of 3 times.
Good luck, pls let me know if it worked for you.
Jarred.


No, still didn't work.
 
BRP Connect doesn't work with Android. Period. The latest version of the software is 13.20, not 13.02. We've been to 4 different dealers, 2 of them are platinum, with the latest stating that they had BRP specialists in their dealership without success. They said disconnect from BRP Connect and wait for a fix. Really? They didn't have to wait for our payment.

I called the BRP help line yesterday (as their email system won't accept my input, keep getting an error that the system is temporarily down - for two months? ) and was promised a phone call within 24 hours from their BRP Connect experts. Still waiting.

Wayne
 
start app on phone.

I found on my phone with BRP connect that it wouldn't start the app on its own. Everytime I start the bike I have to physically go in and start the app on my phone, either music or genius and then BRP will connect.
 
BRP Connect doesn't work with Android. Period.
I don't know if you would have any luck with it, but try contacting Bosch MySpin people. They developed the MySpin connection software that is the basis of BRP Connect. Their website states it is compatible with both Android and iOS so your comment above should be dead wrong! But if it is not, something is screwed up royally somewhere between Bosch and BRP.
 
The latest version of the software is 13.20, not 13.02.
You're referring to the dash software version, right?

I came across this link to the APK for the BRP Connect app for Android. https://android.mi9.com/download-app/com.bosch.myspin.launcherapp_brpconnect. It shows the app version as 2.8.1 when the download dialog opens up.

I wonder if there would be any difference by installing from the APK as opposed to download and install directly from the Play Store. There shouldn't be, but you never know!
 
Good morning Bigmo (again, lol)

i have FOBO and absolutely love it. Before you install it watch the Lamonster Install Video on this. Like Lamont says...believe it or not, u actually have to physically touch the Fobo with your phone (when prompted to do so)
‘I strongly recommend you watch and use the install video when installing. I’ve heard a lot of complaints about people w Android trying to use Fobo, I’m hoping it isn’t an Android thing and that these people just didn’t install Fobo properly from the start. I used Lamont’s video and haven’t had a single problem. I also recommend you save your receipt, in the event those “complaints” are justified, and FOBO doesn’t work well w Android you can at least return it. Or contact Fobo for solution before returning. I just really hope it works for you. I love Fobo, use it everyday (from my phone always, in the morning, during a ride when stopped and after pulling her in the garage). It’s a fantastic product, I’ve never clicked on it from BRP Connect screen, just from app on my phone.
Good luck, have a great day.
Jarred.

Got my FOBO yesterday. Install was a breeze. Used my Android phone. Can see it on the phone and on the bike display. I checked the tires and made sure they were at correct pressure (20/28). FOBO was showing 19.5 and 27. Not bad. Need the firmware update to be able to use Android.
 
Great.

Got my FOBO yesterday. Install was a breeze. Used my Android phone. Can see it on the phone and on the bike display. I checked the tires and made sure they were at correct pressure (20/28). FOBO was showing 19.5 and 27. Not bad. Need the firmware update to be able to use Android.

Fantastic Bigmo! Happy to hear you didn’t have any problems w Android. If you have the stock tires, u may want to under inflate the rear tire a bit. Driving heats up the tire and expands it. I was at 28psi (cold) and after 10 min of driving I got a warning, PSI was up to 33. Fronts are fine, but now I have my rear set at about 25-26 cold. And within a few miles it’s 28psi.
Take it for a ride, then check FOBO again. U may not have to reduce psi, just didn’t want u to panic if u get that over inflated warning. Because I sure did panic! Lol
Thanks for letting me know it works w Android.
Jarred.
 
If you just want to play music on 18 F3L do you have to have cell service and/or brp app downloaded. I have a 5 year old moto x phone.
 
If you just want to play music on 18 F3L do you have to have cell service and/or brp app downloaded. I have a 5 year old moto x phone.


Not sure what at "Moto x phone" is but the music you listen to thru the bike's dash is from the music stored in the phone, so you don't need cell service. Sounds like you need to pair to the phone to the headset directly and provide power to the phone and then start the music you have in the phone. The F3L requires Android or iPhone and the last 3-4 year versions. Like for the iPhone would be the 6 or newer then have BRP Connect installed. Pair phone to bike and pair headset to bike then you work the dash to get music or other apps.
 
If you just want to play music on 18 F3L do you have to have cell service and/or brp app downloaded. I have a 5 year old moto x phone.

If you are only going to only play mp3s then you don't need cell service. At least I don't think so, but I cannot be certain. Not much to lose by trying.
 
Do you still pair the phone to the bike.

If you want to BT transmit the tunes from your phone to the dash. Then yes. Then you would have some control of the songs, skip to next or replay previous from the the joystick. Also have the option of playing through speakers or headset. But you would have to start google music play manually from your phone. You could instead not BT pair, plug in the 3.5 mm cable into headphone jack and set your dash audio to aux. Then you would have to control everything from your phone and only have the option of playing through your speakers.
 
I don't know if you would have any luck with it, but try contacting Bosch MySpin people. They developed the MySpin connection software that is the basis of BRP Connect. Their website states it is compatible with both Android and iOS so your comment above should be dead wrong! But if it is not, something is screwed up royally somewhere between Bosch and BRP.

The Sena 30K headset will randomly unpair just using the dash w/BT. Occasionally it forgets the Samsung Not 8 phone. Yes, one can stop and re-pair the devices. Others have mounted their phones on the handlebars to do this while in motion. But the whole point of BRP Connect was to not have to do that, right? Anyway, so far, no call back from BRP.

If my phone is out on the handlebar, then I certainly wouldn't flipping use BRP Connect or the so-called "Advanced Gauge Cluster". The headset works fine paired with the phone and it's apps. Plus my phone is bigger than the AGC display for GPS.

Wayne
 
Yes, I seem to be stuck in "No Track Selected" hell!

Jarred, would greatly appreciate knowing how to fix the "No Track Selected" deal, please. Thanks in advance!

Hi Bigmo

Im no expert but I’m starting to figure out BRP Connect.
If u have phone plugged into front USB and Bluetooth connected to Spyder.
While stopped:
1-launch ur music.
2-hold down joystick to pull up BRP Connect.
3 click on Genious Maps.

Youll be able to play ur music through speakers and have G Maps on dash.
i just tried it and it worked in my ‘18.
Long story short, I don’t think BRP wants us pressing too many buttons while driving. Let me know if u get “No Track Selected” message, I figured out how to fix this.
Good luck, I hope it works.
Jarred.
 
I have a new 2018 F3 bought last month. I have a simular problem mine will say loading and will freeze there no music either from phone or fm won't allow you to change display like it's locked up. Have appt for dealer to check BUDS for issues. The only way to fix temp is to shut off bike and let all lights go off and then restart and sometimes this doesn't help.

Same problem with mine, waiting to hear from BRP
 
So, I have all needed software on my phone, BRP connect, Genius maps. etc..
Here's the problem: I can run Genius maps on the bike display. Fine. I also can listen to music from my phone having control of volume and FFW and reverse. So far so good. When playing the music, I cannot switch back to Genius maps. When I try, I get a screen saying "loading" and that's it. Will not move from there. I can go back to music but it seems when playing music, it locks up everything else. To get the maps again, I practically have to disconnect the phone and start from scratch.
How can I listen to music while having the map on the screen? Also, does the direction voice mute the music and back to music again?
I have a TOM-TOM that I use occasionally and I can see the map while music is playing and stops for voice direction and back to music again
I am frustrated. This system is really complicated.
Any help out there?

I hear your pain. I also have a 2018 RTL and find the new dash panel way beyond my comprehension!!! I would like to ring the neck of the development people that came up with the new system!!!!!
I am a "non-nerd" so I'm am totally lost on what to do. the online stuff doesn't help me at all?? I would love to have my old 2014 panel back??????????
BIG F
 
Also need expert for BRP Connect Music App

Just purchased a 2018 RT Lmtd and am playing with BRP Connect, learning the features and challenges. Making progress, but struggling with the music app. I have an iphone 7. I've loaded the BRP Connect app, as well as the BRP Connect Music app. When I launch BRP Connect, the music app displays on the dash. When I try to launch the Music app, I get the following message

The Music app does not have access to the media library. Please enable the applicable settings in the apps settings when disconnected to the vehicle.

I have been through the settings as well as options for the apps and the app setting under General on the iphone. I cannot find anything that opens up the access to the media library. My music on the phone works fine from the phone.

Any ideas out there as to what I'm missing?

Oh, my dash displays ver 13.2, and the app is up to date.

OK, an update.

I was a DA and did not have the BRP Connect app settings right. Corrected and now it plays my music. But - when the dash is displaying the song and artist, I cannot adjust the volume! Ideas?
 
Last edited:
Back
Top