When coming into an intersection my F3S stalled in third gear. It took a bit of turning the red kill switch on and off a couple of times along with the key before it finally restarted. There were no codes displayed and it definitely was in gear as it couldn't be rolled. Has this happened to anyone else?
-
There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.
F3S Stalling in third gear
- Thread starter Goldenpup
- Start date
That's definitely a malfunction because even if you run out of fuel it still disconnects the drive via the clutch so that you can roll. In fact, as long as the key is on you can (we can) always roll an F3 auto.
Might not be worth worrying about unless it happens again.
Chupaca
New member
Well....
Lets start with ....is it an SE or an SM..?? was it downshifting or were you..?? did you shut her down and then follow the starting sequence or just flip the kill switch and turn the ignition switch..?? If it started back up no codes and is doing fine it may have been a hiccup...:dontknow:
Lets start with ....is it an SE or an SM..?? was it downshifting or were you..?? did you shut her down and then follow the starting sequence or just flip the kill switch and turn the ignition switch..?? If it started back up no codes and is doing fine it may have been a hiccup...:dontknow:
garb55
New member
So if Chupaca is right
Next time try to scare it of get a big enough paper bag to put over the Frunk :roflblack:
Similar threads
