thats sounds great maybe Contact directly to [email protected] thats my dealer and service Place in Sweden. I also have Contact y-Wheelers sweden and they say something about a lambdasond.
-
There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.
New Airflow panels for 2013 ST-S
- Thread starter Steve67
- Start date
thats sounds great maybe Contact directly to [email protected] thats my dealer and service Place in Sweden. I also have Contact y-Wheelers sweden and they say something about a lambdasond.
and so as the fendersOld panels on the left, new on the right.
900Dave
New member
and so as the fenders
Spyder on the right is a base model ST, Spyder on the left is an ST Limited which has the upgraded fenders. The STS also comes with these fenders.
ingramwc
New member
Yea!!!! New panels are installed!!!!!
Today my new panels were installed on my Spyder to fix the heat problem! And it worked!!!!! Plus I had a Laser Alignment done while I was there.
I think the alignment was worth getting done, Spyder seems to track better!!!! No more suffocating heat at intersections or slow traffic!!!!!:thumbup::thumbup::thumbup::thumbup:
Today my new panels were installed on my Spyder to fix the heat problem! And it worked!!!!! Plus I had a Laser Alignment done while I was there.
I think the alignment was worth getting done, Spyder seems to track better!!!! No more suffocating heat at intersections or slow traffic!!!!!:thumbup::thumbup::thumbup::thumbup:
jcasey
New member
Good deal! Now tear those mountain roads up!:clap:
Panel Replacement in Canada?
I have yet to see any 2013 STS for sale in Canada with replaced panels. Have any Canadians had success getting them replaced by BRP under warranty? A post above mentions getting them at BRP cost. Nowhere else have I seen people paying for new panels once BRP started to replace them. Thanks
I have yet to see any 2013 STS for sale in Canada with replaced panels. Have any Canadians had success getting them replaced by BRP under warranty? A post above mentions getting them at BRP cost. Nowhere else have I seen people paying for new panels once BRP started to replace them. Thanks
ingramwc
New member
You probably don't see any 2013 ST models for sale that have been fixed, since the reason for selling them is gone when the heat problem was corrected.
I know I am happy with my 2013 STS now that it has been fixed.
Process is, owner complains to dealer; dealer has to plead owners case to BRP for "Goodwill" parts to fix Spyder; BRP will eventually send new parts to dealer to fix problem.
BRP issued a recall for 2013 RT models for heat issues, why not do the same thing for 2013 RS and ST models!!!:gaah:
I know I am happy with my 2013 STS now that it has been fixed.
Process is, owner complains to dealer; dealer has to plead owners case to BRP for "Goodwill" parts to fix Spyder; BRP will eventually send new parts to dealer to fix problem.
BRP issued a recall for 2013 RT models for heat issues, why not do the same thing for 2013 RS and ST models!!!:gaah:
SNOOPY
Active member
opcorn:
lousd1
New member
I emailed BRP a week and a half ago on a Sunday at 9am and got a repose at 4:30 that same afternoon with a case number and instructions to contact my local dealer. That Monday I called the dealer and they said that they will work with BRP to get the heat dissapation kit and panels. I was shocked by the rapid response by BRP considering it was a Sunday. Hopefully I hear back from the dealer soon. I figured I would give it a few weeks. I picked up my 2013 ST limited 2 months ago and have put 2000 miles on it so far. I am totally happy with it. I am hopeful that this is a sign of good things to come.
Sent from my SM-G900V using Tapatalk
Sent from my SM-G900V using Tapatalk
JacqueTanis
New member
I am so very happy for you. I too experienced excellent customer service from BRP. Someone said something about the dealers having to plead with BRP to get the panels but BRP is not the problem, it is the dealers the owners are working with. I know you are going to so enjoy your new ride. You may experience a little hot air on the inside above your left ankle, but that is a normal exit point for the hot air in the engine compartment and can easily be fixed with high boots or half chaps. Do not block off that area as it might allow the heat to build up and your panels will begin heating up again. Experience speaking here lol. Ride safe
M
MelloYelloSpyder
Guest
I went to the dealer with a claim number and they sent a request to BRP asking for the new air flow panels. Took about 2 weeks for them to come in. BRP said they would send the panels but would not cover installation costs as the bike was out of warranty. No problem, took them home and had them installed in about an hour or so. I could probably do it now in half that time
Marker
New member
BRP will replace ST panels under warranty but you need to stress to your dealer that you cannot put up with the heat issues and need new panels now.
You cannot say its hot but I can put up with it as you will not get new panels. OSR - Ontario Spyder Ryders had quite the discussion about new panels with a member and the dealer finally gave her new panels for her ST
I started the thread on this....BRP has been great and just see your dealer and if they won't help then BRP care.
Steve
Sarge707
Active member
OK So I have Now read over 30 Pages in 2 Separate threads on the sts Panels.
Several times Someone has asked if the Panels would FIT and Help with heat alleviation on the 08-12 GS/RS???
My 09 GS is Not terribly hot with the lower panels off BUT if it would make it even cooler running Bars wise I would spent the $$ 333.99 Per kit=$668 Minus a Heafty discount to Buy them for my09GS
Question is and has been asked several times without answer-
Has anyone put the Air Scoop kit for the 2013 ST and Now stock on the ST/RS on a earlier GS or RS model ??? and did it fit without problem and provide extra comfort????
Surely someone has a Answer???
Several times Someone has asked if the Panels would FIT and Help with heat alleviation on the 08-12 GS/RS???
My 09 GS is Not terribly hot with the lower panels off BUT if it would make it even cooler running Bars wise I would spent the $$ 333.99 Per kit=$668 Minus a Heafty discount to Buy them for my09GS
Question is and has been asked several times without answer-
Has anyone put the Air Scoop kit for the 2013 ST and Now stock on the ST/RS on a earlier GS or RS model ??? and did it fit without problem and provide extra comfort????
Surely someone has a Answer???
Last edited:
rumman
New member
Airflow Panels for 2013 St-S
I live in Edmonton, AB , and it does not get extremely warm out as it would in the Southern States, however this year has had some warm days for up here and I have noticed the heat coming off the engine onto my legs. Needless to say it is not comfortable. I just sent a request to BRP thru their EMail address, which I found on this thread, to have the panels replaced. So lets see what their response is. Time will tell. I shall let you know what happens. Take Care.
I live in Edmonton, AB , and it does not get extremely warm out as it would in the Southern States, however this year has had some warm days for up here and I have noticed the heat coming off the engine onto my legs. Needless to say it is not comfortable. I just sent a request to BRP thru their EMail address, which I found on this thread, to have the panels replaced. So lets see what their response is. Time will tell. I shall let you know what happens. Take Care.
Sarge707
Active member
So NO ONE has put the ST air scoop kit on a 2008-2012 GS/RS???????
900Dave
New member
With the new frame in 2013 I believe the panel mounts are completely different and these panels will not fit on an 2008 to 2012 Spyder. I do not know this for a fact but I believe this is the issue.
Rumman any news from BRP?
I also contacted BRP and heard back I was to contact dealer to initiate the claim. I spoke with another dealership in my hunt for an SRS and they couldn't find out anything. I suspect this has been less of an issue in Canada. If you have luck in Edmonton let us know
I also contacted BRP and heard back I was to contact dealer to initiate the claim. I spoke with another dealership in my hunt for an SRS and they couldn't find out anything. I suspect this has been less of an issue in Canada. If you have luck in Edmonton let us know
Similar threads
