Page 1 of 8 12345 ... LastLast
Results 1 to 25 of 191
  1. #1
    Active Member TCBoone's Avatar
    Join Date
    Dec 2022
    Location
    CA
    Posts
    66
    Spyder Garage
    0

    Default UPDATED Post! New Installation Instructions - A small Safety Mod to our 2022 RTL

    A full video review see link below ↓

    Riding two up in traffic on multi lane streets is a regular routine at least for part of our rides. Of course, there is the lane change that requires a turn signal and then a manual cancel. Doing this while focusing on the traffic around us made it less than ideal to have to monitor the dash signal to see if the cancel was successful. Which all too often would revert to the opposite direction. Causing me to divert my attention toward the “blinker button” so I could stop the back and forth signaling and end the confusing signals traffic to our rear were seeing. (Yes, I know, I was that guy …)

    Ok, maybe you have been riding for years and have never had this problem, I never have either while riding a number of two wheelers. The design of the stock BRP blinker button has a small flat spot and angled sides making it an issue for a large, gloved hand like mine to execute a straight-in push. Maybe some have better muscle memory and get the job done without a second thought, great!

    I found a perfect solution for me, replace the stock part with a better design. One that allows a push that does not deflect to one side or another when all you want to do is cancel the turn signal. This is a very small and seemingly insignificant upgrade but for my wife and I who really enjoy our time riding, having fewer distractions provides a safer experience and is for us a worthwhile upgrade.

    The first photo shows the original part with a small area required for a straight-in push to cancel; any contact with this button that is slightly off-center triggers the turn signal, usually in the opposite direction, instead of turning it off.

    The second photo is of the replacement blinker button with a larger flat spot that is easy to find without taking my eyes off the road and cancels correctly every time.

    I suspect there are some who consider this trivial, but when your attention is diverted it needs to be for a good reason and only briefly, not for a design flaw. Let us know have you ever experienced this problem?


    For more information please send me a PM, Thanks


    OEM1.jpg


    BB2.jpg







    Update - Shifter Pad

    Installed the shifter pad and went for a ride on one of our favorite routes here in northern California. You know the kind that has a mix of tight and long sweeping turns along with lots of frequent elevation change. The kind of road that encourages spirited riding, requiring one to shift up and down the gears to keep the Spyder in its peak power band.

    During the ride I noticed my left hand was in a more relaxed position. The added thickness of the up-shifter pad allows the thumb to reach the control to upshift from a less extended reach. Anytime we engage in a repeat motion, designing better ergonomics makes a difference, especially over time.

    BRP builds beautiful machines, that has been improved upon over the years, some of those improvements most likely have come from owners. While the mods we are trying out are only slight changes, they are definite improvements and something that Can Am On Road should consider for their new production models.

    Thank you to everyone who has provided feedback about these mods. Appreciate this forum to be able to share these ideas along with each comment and kind words.

    Thank you for reading and posting,

    TC




    shifter pad side view.jpg

    shifter pad aview.jpg




    A full video review https://www.youtube.com/watch?v=yzvdauj_czg



    Important Update! – new Turn Signal Button Installation Instructions

    As the weather has started to warm up there is a possibility that the Turn Signal Button may become loose.

    It is strongly recommended as a precaution to apply a small amount of E6000 adhesive.

    It is a permanent adhesive that can be removed should the need arise in the future.

    This should solve any issues from prolonged sun exposure during the summer.








    The redesigned Turn Signal Knob does not fit the 2024 models,
    because the stalk the knob attaches to has been redesigned.

    The Shifter Pad will fit all models.




    Last edited by TCBoone; 11-09-2024 at 03:29 PM. Reason: Updated Post New Installation Instructions
    2022 RT Limited Deep Marsala Chrome

  2. #2
    Very Active Member RayBJ's Avatar
    Join Date
    Sep 2020
    Location
    Middletown, NJ
    Posts
    1,401
    Spyder Garage
    1

    Default

    Where did you get the replacement cap?
    '20 Spyder RT: Bajaron swaybar. Vredestein tires, Pedal Commander, Elka front shocks, GPS/USB/12V handlebar mount, Heli-Bars, Radar Detector, KOTT grills & vents, Shad top case, chin & DRL LEDs.
    2020 RT base , Chalk White

  3. #3
    Active Member GFrog's Avatar
    Join Date
    Jan 2022
    Location
    Bedford, Nova Scotia
    Posts
    149
    Spyder Garage
    0

    Default

    This happens to me all the time. I would also like to know where you got it from.
    Thanks
    2022 Spyder Sea to Sky Mystery Blue
    2009 Suzuki Boulevard M50 SE

  4. #4
    Very Active Member
    Join Date
    Apr 2020
    Location
    Edgerton,WI
    Posts
    563
    Spyder Garage
    1

    Default

    Brilliant! Where did you find the knob?
    2019 F3L , Covid Blue

  5. #5
    Very Active Member
    Join Date
    Feb 2020
    Location
    Minnesota,USA
    Posts
    575
    Spyder Garage
    0

    Default

    I also want ONE! Start mass production...
    2020 RTL Chrome, Marsala Red "Non-Directional Tires, Centramatic Balancers"
    Front- Kumho KH-16 175/55r15 @17psi, Rear-General Altimax RT-45 215/60r15 @20psi
    BaJa Ron Ultra 3 pcs sway bar kit
    10W40 Amsoil Synthetic Motorcycle oil
    7jurock 25" tinted windscreen w/flip
    Frogman Dave's "Signal Button"
    If in Doubt, Don't Do It!
    " Pros: Excellent Bug Killer, Cons: Pizz Poor Pothole Dodger"

  6. #6
    Very Active Member Peteoz's Avatar
    Join Date
    Jun 2016
    Location
    Harrington, Australia
    Posts
    4,289
    Spyder Garage
    2

    Default

    Yep, even though I can work it well “most” of the time, with winter gloves it is a bit trickier. This option would suit me, too, TC. Great idea

    Pete
    Harrington, Australia

    2021 RT Limited
    Setup for Tall & Big.... 200cm/6'7", 140kg/300lbs, 37"inleg.

    HeliBars Handlebars
    Brake rubber removed to lower pedal for easier long leg/Size 15 EEEEW boot access.
    Ikon (Aussie) shocks all round, with sag adjusted for extra 3/8” clearance up front
    Russell Daylong seat 2” taller than stock (in Sunbrella for Aussie heat & water resistance)
    Goodyear Duragrip 165/60 fronts (18psi) - provides extra 1/2” ground clearance.
    Kenda Kanine rear.
    2021 RT Limited , Brake pedal rubber removed for ease of accessing pedal with size 15 boots. Red

  7. #7
    Active Member
    Join Date
    Sep 2021
    Location
    PA
    Posts
    91
    Spyder Garage
    0

    Default

    Certainly needed.
    2020 RT Limited
    2018 RT Limited for sale, put 18,000 miles on her.

  8. #8
    Active Member SkipH's Avatar
    Join Date
    Nov 2021
    Location
    Nevada
    Posts
    93
    Spyder Garage
    0

    Default

    I want one too!
    Adj removable backrest, KOTT radiator screens
    Double horn (118db), Lamonster mirror fix
    FOBO 2, Trunk rack and new support.
    Afterburnerz taillights
    Drinks2go cup holder, replaced the seat strut
    Garmin Drive Smart 71 GPS, Large brake pedal
    White pulley with Loctite 603, Pedal Commander, Trunk Strut spring
    Laminar Lip wind deflector, side windshield wind deflectors,
    Now No Buffeting at all.
    Home made Aluminum belt guard, Shorty antenna
    Show chrome wide windshield, Belt dampener
    Top cuffs and larger Mirrors
    Car tires

    7x12 enclosed trailer

    2021 RTL Dark Chalk Metallic

    Skip H.

  9. #9
    Active Member
    Join Date
    May 2021
    Location
    Daytona Beach FL
    Posts
    47
    Spyder Garage
    1

    Default

    Can I get one that looks like a die? As in one cube from a set of dice.
    2020 Spyder RTL Chalk/Black
    2020 RTL , Chalk / Black

  10. #10
    Very Active Member
    Join Date
    Aug 2013
    Location
    SF Bay Area
    Posts
    2,048
    Spyder Garage
    2

    Default

    The more you ride the more practice you get and you get used to it. I don't even look down when touching any of the control buttons. I learn where they are.
    Last edited by Peter Aawen; 01-28-2023 at 04:50 AM. Reason: do t - don't ...;-)
    2021 F3 Ltd , Magna Red

  11. #11
    Very Active Member Haze's Avatar
    Join Date
    Oct 2015
    Location
    Lynden, WA
    Posts
    1,243
    Spyder Garage
    0

    Default

    Great idea. I need this fix for my byke. Did you 3D print this new button?
    David C
    2016 F3T
    DIY Garage Door Opener & GPS Mount
    Battery tender cable
    Rear IPS Pack Rack



  12. #12
    Active Member
    Join Date
    Mar 2011
    Location
    Pence, wi.
    Posts
    79
    Spyder Garage
    1

    Default

    I want one asap!! Should come that way stock!
    Last edited by Peter Aawen; 04-30-2023 at 05:09 PM. Reason: .
    2022 Spyder RTL- Chrome , Larger brake pedal Deep Marsala Red

  13. #13
    Very Active Member Bfromla's Avatar
    Join Date
    Aug 2014
    Location
    Bossier LoUiSiAna
    Posts
    6,212
    Spyder Garage
    1

    Default

    BLINKERS?

    2013 STL SE5 BLACK CURRANT
    SpyderPop's: LED bumpskid
    SmoothSpyder: dualmode back rest
    T r * * LED:foam grip covers, Tricrings, FenderZ,
    brake light strips, wide vue mirrors
    Rivico SOMA modulation brake leds
    sawblade mowhalk fender accents
    minispyder dash toy
    Lid lox
    KradelLock
    Pakitrack
    GENSSI ELITE LED H4 headlights
    FLO (Frunk Lid Organizer)
    BRP fog lights, trailer hitch
    SENA 20S EVO
    2013 STL , Stock Stock Black currant

  14. #14
    Active Member
    Join Date
    Oct 2020
    Location
    Vinton, IA
    Posts
    195
    Spyder Garage
    0

    Default

    I'm on board! Where'd you get it?

    2020 Spyder RT Limited; Deep Marsala/Chrome

    Formosa AZ01 165/50/R16's on PPA Recluse wheels up front
    General Altimax RT43 215/60/R15 on factory rear

    Primary exhaust: RLS Cat delete w/ his baffle; secondary, custom built w/ Flowmaster HS2
    Suspension: BajaRon swaybar (highly recommended!), M2 coil-overs, front & rear (also highly recomended!)
    Extra LED lighting and misc. to suit my needs/wants

  15. #15
    Active Member
    Join Date
    Dec 2020
    Location
    North Germany
    Posts
    47
    Spyder Garage
    1

    Default

    very nice, would need one even with winter-gloves
    modified 2020 F3-S for paraplegics including handbrake, wheelchairmount etc.
    2020 F3-S , pedalbox black

  16. #16
    SpyderLovers Ambassador Little Blue's Avatar
    Join Date
    Sep 2017
    Location
    500 CITY, INDIANA USA
    Posts
    7,112
    Spyder Garage
    1

    Default

    ....Well this is a interesting read. I think it is a really good part. Sooooooo is the knob available anywhere?
    Did you make it or have it made?
    I didn't see it on Amazon.

    Please let us know more details about the part.
    Thanks and have a Blessed Day.
    Last edited by Peter Aawen; 11-06-2023 at 08:40 PM. Reason: .
    ENJOY YOUR TIME ON YOUR SPYDER
    Ryde with a Friend and Stay Safe.

    My Spyder .....'Little Blue-Boy'
    2016 RT Limited , Orbital Blue

  17. #17
    Very Active Member
    Join Date
    Oct 2016
    Location
    Sebring, FL
    Posts
    1,797
    Spyder Garage
    0

    Default

    Now this is one 'good' post, and I thought I was the only one that had this problem.
    Last edited by Peter Aawen; 01-28-2023 at 07:46 AM. Reason: on - one ;-)

  18. #18
    Active Member GS1's Avatar
    Join Date
    Sep 2014
    Location
    New Jersey
    Posts
    377
    Spyder Garage
    2

    Default

    I'm in
    Improvise, Adapt, Overcome, Semper Fi
    2020 RT
    Limited heated seats
    removable back rest & rack
    XK Glow light
    Paint with light painted panels
    BajaRon Shock adjuster kit
    (Gone but not forgotten ) 2009 RS SE5

    2020 RT , Chalk White

  19. #19
    Very Active Member
    Join Date
    Apr 2020
    Location
    Edgerton,WI
    Posts
    563
    Spyder Garage
    1

    Default

    Quote Originally Posted by bikerchris1270 View Post
    Brilliant! Where did you find the knob?
    I asked for one through him….. we’ll see.
    Last edited by Peter Aawen; 04-30-2023 at 05:10 PM. Reason: .
    2019 F3L , Covid Blue

  20. #20
    Very Active Member pidjones's Avatar
    Join Date
    Mar 2021
    Location
    East TN
    Posts
    538
    Spyder Garage
    1

    Default

    One more example of BRP designing something with flaws and refusing to correct.
    "Love 'em all.... Let GOD sort 'em out!"
    2021 RTL Dark Chalk Metallic with comfort seat
    1978 GL1000 w/'75 engine show bike
    1976 RD400c

  21. #21
    Active Member
    Join Date
    Oct 2021
    Location
    TX
    Posts
    50
    Spyder Garage
    1

    Default

    I have the same blinker issue as do many others and would like to try the improved button.
    2019 RTL , Blue

  22. #22
    Very Active Member Tango's Avatar
    Join Date
    Apr 2012
    Location
    Florida
    Posts
    3,036
    Spyder Garage
    0

    Default

    I wish he would come back and post. Where we can get one, cost, install? Tom
    Baloo is my name. Spyders are my game. Well, it's a doo-bah-dee-doo, yes, it's a doo-bah-dee-doo, I mean a doo-bee, doo-bee, doo-bee, doo-bee, doo-bee-dee-doo. And, well, now. Ha ha! What have we here?



    2020 Petrol Blue Metallic RTL

  23. #23
    Member
    Join Date
    Mar 2022
    Location
    Virgil, Ontario
    Posts
    23
    Spyder Garage
    0

    Default

    I’ve had the same issue.
    Where can I get one?
    Last edited by Peter Aawen; 04-30-2023 at 05:10 PM. Reason: .
    2021 Spyder RT Limited Chalk White

  24. #24
    Active Member
    Join Date
    Feb 2020
    Location
    illinois
    Posts
    267
    Spyder Garage
    0

    Default

    I would think that all of us that ride our bikes a lot and use the turn signals often when passing has this issue with not finding the cancelling sweet spot every time and then engage the other direction signal. I am having a quiet moment now thinking Lamonster will be reading and come to the rescue with a new product.....

  25. #25
    Very Active Member
    Join Date
    Aug 2014
    Location
    Northern Kalifornia
    Posts
    3,566
    Spyder Garage
    0

    Default

    "I suspect there are some who consider this trivial, but when your attention is diverted it needs to be for a good reason and only briefly, not for a design flaw. Let us know have you ever experienced this problem?"

    Nope, never experienced this problem. Multitasking comes to mind. Some have it and some don't. I have the rectangle shaped stick on blind spot mirrors attached to my left and right rearview mirrors for obvious reasons. When I change lanes I first check my mirrors and then do a quick head turn look see to confirm I have the room to safely merge into the next lane. When I engage my turn signal I don't remove my thumb from the turn signal button until the lane change is complete, then I push it to cancel the signal. Walla, all done and no problem.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •