• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Wireing diagram for a 2013 RT S

ST114ME

New member
Trying to locate a wire to tap into for switched power which is not a wire for some type of computer. I have looked for a Wireing diagram without success for a 2013 RTS. Little help please.
This will allow me to continue to install my perminate heat controllers for the gerbing liners for myself and my wife.
Thank You
Bill Kane
 
Hopefully you are trying to find something to switch a relay to activate an auxiliary fuse block. On the earlier versions there are no circuits that can power that much amp draw directly. On the 2013 RT, you could tap the rear trunk cigarette outlet feed (up to 10 amps) if you fused it as switched, or disconnect that circuit from the outlet (which you would then run unswitched) and steal that feed. If all you want to do is pull in a relay for an auxiliary fuse block, the light on the rear passenger heated grips is a good one to tap in the rear, or the instrument lights up front.
 
If you don't have the accessory plug in the Frunk that wire is available. Fused at 10 Amps from the same circuit that powers the one in the trunk.
 
Back
Top