Winter Farkle Time!

[Purple Guy]

Had a chance to do a little Farkleing!

Have to thank Deanna777 for the inspiration for Farkle #1
Painted my Dashboard Bezel




Had a chance to put on my Spyderpops Stainless Grilles & KOTT Grilles











I'd also like to give a shoutout and :2thumbs: to Finless Bob for his video on replacing the Spyder Speakers, probably saved me a week! :roflblack:

And this little gem is a pic of just how far you have to go to replace the saddlebag cargo module, I don't recommend this!!! (rear speaker not part of this tear down)

 

[Chupaca]

Congratulations..!!

looks great. The dash is awesome and always liked the grilles. But winter is not over..what else..?? :hun:

 

[tip]

Looks very nice

Great job!

 

[garb55]

Did you use OEM paint on the dash or did you find some other paint that matched
I want to do dash and rear fender
Thanks
Don

 

[Deanna777]

Did you use OEM paint on the dash or did you find some other paint that matched
I want to do dash and rear fender
Thanks
Don

I used VHT High Temperature Engine Metallic Drive Train Paint Chemical Resistant Coating. Sent a pm Deanna

 

[Purple Guy]

looks great. The dash is awesome and always liked the grilles. But winter is not over..what else..?? :hun:

Still working on the speaker upgrade, powder coated windshield bracket and I just ordered the Top Case Mirror from Doc Humphreys. :thumbup:

 

[Purple Guy]

Did you use OEM paint on the dash or did you find some other paint that matched
I want to do dash and rear fender
Thanks
Don

VHT high temperature Engine Metallic SP402 Burnt Copper + Clear Coat

 

[BLUEKNIGHT911]

YESSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSS SSSSSSSSSSSSSSSSSSSSSSSS

VHT high temperature Engine Metallic SP402 Burnt Copper + Clear Coat

....Since you have used this Paint and seen it close up and personal , do you agree that it is EXTREMELY close to the OEM Cognac color.........The only thing I did different was to keep the area directly around the instrument cluster FLAT BLACK, to prevent any glare possibilities..........I found this paint awhile back and used it on my RSS ( after buffing the shine out ).....I then convinced DEE that with a few coats of CLEAR in would deepin the shine effect............I think it really makes the Dash surround POP..................Nice job.........Mike :thumbup:

 

[Purple Guy]

....Since you have used this Paint and seen it close up and personal , do you agree that it is EXTREMELY close to the OEM Cognac color.........The only thing I did different was to keep the area directly around the instrument cluster FLAT BLACK, to prevent any glare possibilities..........I found this paint awhile back and used it on my RSS ( after buffing the shine out ).....I then convinced DEE that with a few coats of CLEAR in would deepin the shine effect............I think it really makes the Dash surround POP..................Nice job.........Mike :thumbup:

The color match is spot on! At $15 a can how can you go wrong!
I thought about leaving the part closest to the gauges black as well, after the first couple coats. :roflblack:
I like the look I have though and if glare becomes a problem it will be an easy enough fix.

 

[BLUEKNIGHT911]

PER CAN------------------------------WOW

The color match is spot on! At $15 a can how can you go wrong!
I thought about leaving the part closest to the gauges black as well, after the first couple coats. :roflblack:
I like the look I have though and if glare becomes a problem it will be an easy enough fix.[/QUOTE.......................Only $ 8.50 here, but if you actually used BRP paint it would have been $ 50 + at least..............glad you liked it ,,,,,,Mike :thumbup:

 

[Purple Guy]

The color match is spot on! At $15 a can how can you go wrong!
I thought about leaving the part closest to the gauges black as well, after the first couple coats. :roflblack:
I like the look I have though and if glare becomes a problem it will be an easy enough fix.[/QUOTE.......................Only $ 8.50 here, but if you actually used BRP paint it would have been $ 50 + at least..............glad you liked it ,,,,,,Mike :thumbup:

$8.50 USD, that's just short of $100 CAN! :roflblack:

 

[ARtraveler]

A beautiful paint job. :2thumbs::2thumbs: :firstplace::firstplace: :bowdown::bowdown:

 

[Deanna777]

Thanks you, thank you, thank you, Deanna

 

[Dubld]

You inspired me! That dash really pops! I ordered the paint to do mine.

 

[m2motorsport]

Had a chance to do a little Farkleing!

Have to thank Deanna777 for the inspiration for Farkle #1
Painted my Dashboard Bezel




Had a chance to put on my Spyderpops Stainless Grilles & KOTT Grilles rohana wheels











I'd also like to give a shoutout and :2thumbs: to Finless Bob for his video on replacing the Spyder Speakers, probably saved me a week! :roflblack:

And this little stance wheels gem is a pic of just how far you have to go to replace the saddlebag cargo module, I don't recommend this!!! (rear speaker not part of this tear down) tsw wheels

NICE WORK!! :clap: